When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Want to turn 99 gasser single cab short bed with camper shell into a sort of ram chager or 4 runner style. With bench seat in back. I get roll cage and all the safety needed. But has anyone seen this or done it.
Want to turn 99 gasser single cab short bed with camper shell into a sort of ram chager or 4 runner style. With bench seat in back. I get roll cage and all the safety needed. But has anyone seen this or done it.
Easier way is to remove rear glass from the cab and front glass from camper shell, and use accordion boot to seal the gap.
But for easier acces, you want bigger opening (and from the title I understood that you are willing to cut) and it's doable. Just a lot of work. But you'd use the accordion boot in that case, too.
If it where me i would weld pieces in between the cad-bed and make it "one piece" Then cut the back top section off a ramcharger and weld it up. Lot's of fab work! I believe i seen in Mexico they actually made a ramcharger from the second gen rams.
If it where me i would weld pieces in between the cad-bed and make it "one piece" Then cut the back top section off a ramcharger and weld it up. Lot's of fab work!
That would require bodymounts under the bed, otherwise it would rip itself apart in no time.
Want to turn 99 gasser single cab short bed with camper shell into a sort of ram chager or 4 runner style. With bench seat in back. I get roll cage and all the safety needed. But has anyone seen this or done it.
You'll need to do some heavy reinforcing as the cab and body tend to flex separately.