Another Cam question
#2
#4
#5
#6
#7
Trending Topics
#8
That's the thing under on what I want. I'm in it this far might as well replace the cam. They SEEM to know what they are talking about. I'm open to recommendations though.
#9
What's the stock lift, so I can try to find a can that work? Also Happy Memorial Day at 3 there is a moment of silence if you participate in that!
#10
Stock is like .460 or something or other, max without changing other parts is .480.
With stock heads/bottom end, I would stick with a cam that wanted to play in the 1000-5000 RPM range, designed for towing/RV. What intake ya have on there? If you are still running the kegger, then you REALLY want to stick with a cam that builds its power down low, as if you try and run higher RPM, the kegger will choke you out. I think it maxs out at around 4500 or so...... (mainly due to runner length.)
With stock heads/bottom end, I would stick with a cam that wanted to play in the 1000-5000 RPM range, designed for towing/RV. What intake ya have on there? If you are still running the kegger, then you REALLY want to stick with a cam that builds its power down low, as if you try and run higher RPM, the kegger will choke you out. I think it maxs out at around 4500 or so...... (mainly due to runner length.)