2002 2500 4x4 knuckles
#1
2002 2500 4x4 knuckles
Hey all.
I have a 2002 2500 4X4 V10 Quad Cab. Doing the hubs and both are on there but good. Used a torch to heat it up. Not budging. Bought this other tool that provides leverage so you can try whacking them off. Nothing. I'm thinking of cutting the knuckles off and just going with new ones but can't seem to find them anywhere.
Ideas?
Thanks
I have a 2002 2500 4X4 V10 Quad Cab. Doing the hubs and both are on there but good. Used a torch to heat it up. Not budging. Bought this other tool that provides leverage so you can try whacking them off. Nothing. I'm thinking of cutting the knuckles off and just going with new ones but can't seem to find them anywhere.
Ideas?
Thanks
#2
#3
#4
#5
1-11/16" is the correct size for the 2nd gen stub shaft nut. I noticed that as well, since the size of the bolts holding in the hub bearing have 14MM 12 point heads on them. I believe he's working on a later model truck, but the removal concept he used also works on 2nd gen trucks.
#6
1-11/16" is the correct size for the 2nd gen stub shaft nut. I noticed that as well, since the size of the bolts holding in the hub bearing have 14MM 12 point heads on them. I believe he's working on a later model truck, but the removal concept he used also works on 2nd gen trucks.
#7
Trending Topics
#8
1-11/16" is the correct size for the 2nd gen stub shaft nut. I noticed that as well, since the size of the bolts holding in the hub bearing have 14MM 12 point heads on them. I believe he's working on a later model truck, but the removal concept he used also works on 2nd gen trucks.
https://www.dormanproducts.com/p-49781-917-512.aspx
One Amazon review claims the Dormans are 10mm instead of his original size of 19mm on an '03.....NEITHER of those sizes makes sense to me so I think he was smokin' it....
#10