DodgeForum.com

2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

1999 Dodge Ram 1500 ( Cluster will not read speed)

Thread Tools
 
Search this Thread
 
Old Nov 15, 2024 | 03:15 PM
Share
  #1  
Woopty23's Avatar
Woopty23
Thread Starter
|
Rookie
Joined: Jul 2024
Posts: 77
Likes: 2
Default 1999 Dodge Ram 1500 ( Cluster will not read speed)
These are all the lights that are lit up on my cluster. The check engine is for code p0500
These are all the lights that are lit up on my cluster. The check engine is for code p0500
 
Reply
0
Old Nov 15, 2024 | 03:17 PM
Share
  #2  
Woopty23's Avatar
Woopty23
Thread Starter
|
Rookie
Joined: Jul 2024
Posts: 77
Likes: 2
Default
Ive replaced all sensors, sensor on the rear axle, sensor for the tail shaft on the transmission, neutral safety switch, ive even switched out abs modules. Still the same issue if anyone can help thatd be amazing.
 
Reply
0
Old Nov 15, 2024 | 03:21 PM
Share
  #3  
AtomicDog's Avatar
AtomicDog
Champion
10 Year Member
Liked
Loved
Community Favorite
Joined: Sep 2012
Posts: 4,868
Likes: 434
From: Central VA
Default
Might give this a try -
 
Reply
0
Old Nov 15, 2024 | 03:40 PM
Share
  #4  
Woopty23's Avatar
Woopty23
Thread Starter
|
Rookie
Joined: Jul 2024
Posts: 77
Likes: 2
Default
Thank you, i gave it a try and the test worked as should. Still the same
 
Reply
0
Old Nov 15, 2024 | 04:27 PM
Share
  #5  
AtomicDog's Avatar
AtomicDog
Champion
10 Year Member
Liked
Loved
Community Favorite
Joined: Sep 2012
Posts: 4,868
Likes: 434
From: Central VA
Default
Did you check the wiring associated with the speed sensor on top of the rear differential?
 
Reply
0
Old Nov 15, 2024 | 10:05 PM
Share
  #6  
Woopty23's Avatar
Woopty23
Thread Starter
|
Rookie
Joined: Jul 2024
Posts: 77
Likes: 2
Default
Originally Posted by AtomicDog
Did you check the wiring associated with the speed sensor on top of the rear differential?
yes ive traced it all the way to the point where it goes up into the frame
 
Reply
0
Old Nov 16, 2024 | 01:16 PM
Share
  #7  
Woopty23's Avatar
Woopty23
Thread Starter
|
Rookie
Joined: Jul 2024
Posts: 77
Likes: 2
Default
There was some places where the wires where showing but nothing nicked or cut to where i would be loosing voltage, ive by now re did the looming and put electrical tape over it
 
Reply
0

Trending Topics

Old Nov 16, 2024 | 01:18 PM
Share
  #8  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,453
Likes: 4,218
From: Clayton MI
Default
Do you have a scanner that can read codes/data??? See if the PCM is getting a VSS signal.... Might be as easy as a bad sensor on the rear diff.
 
Reply
0
Old Nov 16, 2024 | 05:31 PM
Share
  #9  
Woopty23's Avatar
Woopty23
Thread Starter
|
Rookie
Joined: Jul 2024
Posts: 77
Likes: 2
Default
It can read live data for vss, i will check tonight and let u know.
 
Reply
0
Old Nov 16, 2024 | 09:18 PM
Share
  #10  
Woopty23's Avatar
Woopty23
Thread Starter
|
Rookie
Joined: Jul 2024
Posts: 77
Likes: 2
Default
I just did a drive with the scanner connected and the vss was staying at 0 the whole time
 
Reply
1



Advanced Search
Reply Closed Thread Share
Forum Jump

All times are GMT -4. The time now is 05:31 AM.