224 Cam Videos
#1
224 Cam Videos
Trucky is going to put one up for me he filmed today. I hooked the truck's Split Second Computer up to the Aalienware to tune the alcohol injection system. You will see
#1 Vacum Pressure/Boost
#2 RPMs
#3 Electrical Signal Input/Out from the PCM, Split Second, Injectors, and Plug Coils.
#4 Graph tracking engine profile
I'm still having trouble with belt slip but as soon as I get that fixed I can finish tuning and post of some WOT videos.
Most Recent Tune
http://www.youtube.com/watch?v=Y1xqZ7-ulU0
At Idle
http://www.youtube.com/watch?v=ia3hoc5QR7A
0-60 tuning run with massive belt slip
http://s253.photobucket.com/albums/h...ent=224WOT.flv
#1 Vacum Pressure/Boost
#2 RPMs
#3 Electrical Signal Input/Out from the PCM, Split Second, Injectors, and Plug Coils.
#4 Graph tracking engine profile
I'm still having trouble with belt slip but as soon as I get that fixed I can finish tuning and post of some WOT videos.
Most Recent Tune
http://www.youtube.com/watch?v=Y1xqZ7-ulU0
At Idle
http://www.youtube.com/watch?v=ia3hoc5QR7A
0-60 tuning run with massive belt slip
http://s253.photobucket.com/albums/h...ent=224WOT.flv
Last edited by Blown287; 05-01-2010 at 11:04 PM.
#2
#5
#7
Are you kidding me, Travis is a true friend. He rode with me today while I did 50 or so 0-60 launches while trying to dial in my pulley. Lol, we left rubber all over the rural highways.
We did fix one problem, I had a stripped bolt on my tensioner setup. We got that fixed with a quick stop at Menards, lol.
We did fix one problem, I had a stripped bolt on my tensioner setup. We got that fixed with a quick stop at Menards, lol.
Trending Topics
#9
Nope, its the tensioner pulley belt. The serpentine belt turns the "jack stand pulley" on the blower mount. The jack stand pulley also turns the bolwer drive pulley on the supercharger itself. That pulley in the middle is the tensioner pulley.
Picture019.jpg
Picture019.jpg