That is completely possible.

 

Thanks blown, It will be a long road there

i picked up the turbo yesterday, found a good deal on Ebay.

Its a new Garrett T4 for 500 bucks

Capture1.jpg

Capture2.jpg

Capture3.jpg

On monday or tuesday ill post up the part list I made with brand and retailer.

 

Is there any dsm guys on here who have a good used turbo?

 

try driftmotion.com

 

Ok guys, this is the part list I'm working on. This is what I consider the "essentials" or the bare minimum I need to get started.

I’m doing some research on engine management so I will hold off on that for a bit.

If you guys could point me in the right direction to get the following parts that would be great, I'm looking for good quality but of course great prices =D

Parts I already bought:



Turbo
$505.00
GARRETT
EBAY
ITEM # 260779128657


Transmission Cooler
$65.00 AUTO ZONE


Cone Filter
$0.00
AEM
RECYCLE FROM CAI




Parts I still need:

Electric Oil Pump
RACER PARTS WHOLESALE

Oil Feed line/Return line

Wastegate

Blow off Valve

Bigger Injectors
$358.50
FIVE MOTOR SPORTS

Intercooler

High Pressure Fuel Pump

Oil Pressure Gauge

Wideband Gauge

PSI Gauge

I plan to do things in the following order.

Install Transmission cooler

Install intercooler (no piping yet)

Mount oil return pump

Run oil lines

Replace fuel pump.

Mount turbo under truck.

After that I would take the truck to the muffler shop and have them fabricate a Y pipe for me.

I will do the rest of the piping myself except the muffler, and install the blow off valve and wastegate.

These are the pip sizes I'm going to use.

2.5” pipes from headers to turbo.

2.5 pipe from turbo to intercooler.

3” pipe from intercooler to throttle body ( I can keep my current CAI pipe)

 

Man MR keep it going! I don't know that I'll ever really do a turbo on my truck but I will definitely keep this thread in case I do.

 

MR,

Tial makes great components. I use both their wastegate and blow off valve on my car. Their tech support is second to none, along with the quality of their products.

http://www.tialsport.com/products.htm

I've been using Innovate widebands forever. Again, excellent customer service, tech support, and quality products. Here's what I would get for your setup. It's inexpensive and requires an easy installation.

http://www.innovatemotorsports.com/products/MTXL.php

Ruger, I'm a DSM guy. I think Eric Emery still is as well. Unfortunately, I don't have any used DSM turbos lying around. Everything I have is Garrett based. But, I have a friend that might. PM me and let me know what you are looking for.

 

I just vomited in my mouth.