Diablo Information and Reviews
#591
im not sure, but my 07 has it. i looked at it the other day and when i went to adjust it, the middle number already said 255, but the scale only goes from 0-50. so does that mean its all ready set higher than i can manually set it? if i press either arrow it will drop the 255 down to 0-50
#592
I haven't had a chance to go load the latest CROM so maybe it is in there but I have heard of some of the 05's having it and then the 06 on up having it. Im gonna check over on the DSP site and see if I can find anything later tonight.
As for the adjustment, if it is only 0-50 that you can adjust it it probably means that 0 is where it is now (so 255) and 50 would be +50 on top of that. So basically you can probably adjust it fron 255 to 305 or at least that is what I would assume it would be
As for the adjustment, if it is only 0-50 that you can adjust it it probably means that 0 is where it is now (so 255) and 50 would be +50 on top of that. So basically you can probably adjust it fron 255 to 305 or at least that is what I would assume it would be
#594
http://www.diablosport.com/index.php...wtopic&t=22010
#595
Need help with 1st install/tune ever?!?!?!?
Dodge Community,
I am having trouble with the first installation of a tune on my Ram. I own a 2007 Ram 1500 Reg Cab 4x4 Sport 2Dr 4x4 5.7V8Hemi.
During the first install to the truck i am receiving the following error after turning engine on (Clearly not starting the truck though). "This Vehicle needs an update. diablosport.com/dcx Calid: 05094405AG.............................
What is this all about? I just updated with the latest crom v.9r07 on the U7137
Customer support isn't open on Sat!
Thanks
I am having trouble with the first installation of a tune on my Ram. I own a 2007 Ram 1500 Reg Cab 4x4 Sport 2Dr 4x4 5.7V8Hemi.
During the first install to the truck i am receiving the following error after turning engine on (Clearly not starting the truck though). "This Vehicle needs an update. diablosport.com/dcx Calid: 05094405AG.............................
What is this all about? I just updated with the latest crom v.9r07 on the U7137
Customer support isn't open on Sat!
Thanks
#598
The first time I plugged mine in It told me something like this vehicle needs an update, so on the website where you download the croms there is a program you download, I think its called DSDownloader. Once you hook it all up and install the program it should automatically find the calibration update for you. You probably need the drivers for your cable too.
Did you hook up the tool before you did the 07 update? If you didn't then the tool wouldn't have told the program to find the calibration update.
Did you hook up the tool before you did the 07 update? If you didn't then the tool wouldn't have told the program to find the calibration update.
#599
I do have all that setup. But it never mentions any calibration updates. Im connected and the DSD does not recognize that it needs a calibration update. I will just have to wait for Monday it seems.
Thanks
Thanks
#600
If you want I can send you the 06 crom, Its no different than the 07, the 07 just fixed a glitch on the 05 and 06 trucks. The 07 for me kept telling my my calid wasnt supported, even though I had the 06 running for months.