Data Loggers

 
Thread Tools
 
Search this Thread
 
Old May 7, 2010 | 10:53 AM
  #441  
RedTruck-VA's Avatar
RedTruck-VA
Thread Starter
|
Champion
Joined: May 2009
Posts: 2,732
Likes: 1
From: La Union, Philippines
Default

Originally Posted by AF_HEMI
do you mean selecting "2" instead of "D"? Doing so will still take off in first, then shift to 2. Selecting 1 wont let you out of first gear, selecting 2 does 1st and 2nd gear, and Drive does all gears.
I don't think it really matters but for my data log runs. I use 2 gear with the OD off. I am only doing 0-60 mph runs, but I always do the same gear selection. I going to go play some this after noon.
 
Old May 7, 2010 | 11:16 AM
  #442  
Maori's Avatar
Maori
Professional
Joined: Apr 2005
Posts: 236
Likes: 0
From: Robles Junction/Three Points, AZ
Default

Have the floorshifter going in soon but until then i am starting to get use to shifting manually on WOT runs. I have the shiftlight set on 6100 but with my slow reaction it stills hits the limiter.

Typically wot runs for me once i get use to it would be 1-2-d-2 (to keep in 3rd)

This is a old vid and tune.
http://www.youtube.com/watch?v=OxAizLFHNXk

Gotta drag out the 3815 SC and try out the 0-60 and 1/4 datalog scenarios.
 
Old May 7, 2010 | 12:06 PM
  #443  
RedTruck-VA's Avatar
RedTruck-VA
Thread Starter
|
Champion
Joined: May 2009
Posts: 2,732
Likes: 1
From: La Union, Philippines
Default

That sucker does run!! Great fun.....
 
Old May 7, 2010 | 12:47 PM
  #444  
AF_HEMI's Avatar
AF_HEMI
Champion
Joined: Jan 2009
Posts: 3,411
Likes: 1
From: Minot AFB, ND in person, the 'burgh at heart
Default

i need to play with the manual shifting a bit. i bet i could get close to a tenth off by running out the gears a bit more
 
Old May 7, 2010 | 02:24 PM
  #445  
truckin151's Avatar
truckin151
Grand Champion
Joined: May 2006
Posts: 6,041
Likes: 0
From: Gilbert, Arizona
Default

I know starting in second runs first and second but it moves alot better while accelerating hard. It wont hold the full 1/4 as it will only hold up to 90mph I believe but its good for the 0-60 or light to light runs. Once I get my new springs in I'll play with the first then second then drive but I dont feel like reving it past 6300rpms on the stock springs.
 
Old May 7, 2010 | 03:06 PM
  #446  
RedTruck-VA's Avatar
RedTruck-VA
Thread Starter
|
Champion
Joined: May 2009
Posts: 2,732
Likes: 1
From: La Union, Philippines
Default

Yeah, I have the stock spring thing in the back of my mind when I start turning it up. I did a couple 6.35's this afternoon. But I'm launching so damn soft that it seems am simply driving away from a light. I need to get hooked up and really punch into that converter, then the times will start looking better. And of course putting the roll pan on is going to make it worse. Don't know, but it'll come together....
 
Old May 7, 2010 | 04:07 PM
  #447  
JoeHemi's Avatar
JoeHemi
Record Breaker
Joined: Nov 2008
Posts: 2,273
Likes: 1
From: Pierce County, Wa
Default

Went out and tried the 0-60 times. Did 4 runs and here's my best time. Speed limit was 35 so as soon as I hit 60 I jumped on the brakes lol. Man I love SC's new trans options. I've got more tinkering to do but so far I like what I've come up with for a shift schedule.


Name:  IMG_3979.jpg
Views: 32
Size:  65.2 KB
 
Old May 7, 2010 | 04:15 PM
  #448  
Maori's Avatar
Maori
Professional
Joined: Apr 2005
Posts: 236
Likes: 0
From: Robles Junction/Three Points, AZ
Default

Looking good there.......
Originally Posted by JoeHemi
Went out and tried the 0-60 times. Did 4 runs and here's my best time. Speed limit was 35 so as soon as I hit 60 I jumped on the brakes lol. Man I love SC's new trans options. I've got more tinkering to do but so far I like what I've come up with for a shift schedule.


 
Old May 7, 2010 | 05:53 PM
  #449  
RedTruck-VA's Avatar
RedTruck-VA
Thread Starter
|
Champion
Joined: May 2009
Posts: 2,732
Likes: 1
From: La Union, Philippines
Default

Excellent time !!!!
 
Old May 7, 2010 | 07:47 PM
  #450  
JoeHemi's Avatar
JoeHemi
Record Breaker
Joined: Nov 2008
Posts: 2,273
Likes: 1
From: Pierce County, Wa
Default

the 0-40 is pretty slow but I'll try to get some more runs in tomorrow morning when I head down to my uncles shop to do some more work on the truck. Hopefully there wont be any traffic. No idea where I'll be able to pull off a 1/4 mile time around here without going to jail but I'll look around and see what I can do.
 



All times are GMT -4. The time now is 01:39 AM.