3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Looking to lift and add 38's

Thread Tools
 
Search this Thread
 
Old Dec 18, 2008 | 01:32 AM
  #31  
dodgenitto's Avatar
dodgenitto
Record Breaker
Joined: Dec 2007
Posts: 1,282
Likes: 0
From: Fairplay Colorado
Default

I agree!! Go with the rancho!! Rough country makes some cheap shocks, which are ok, but with a lift there is more to consider then just shocks! But if I did a suspension lift I would not do a rough country lift!
 
Reply
Old Dec 18, 2008 | 08:45 AM
  #32  
WeightLifter500's Avatar
WeightLifter500
Thread Starter
|
Veteran
Joined: Aug 2008
Posts: 343
Likes: 0
From: Chicago
Default

And the 3'' PA body Lift will fit right over the 4'' rancho without a problem?
 
Reply
Old Dec 18, 2008 | 09:07 AM
  #33  
dodgenitto's Avatar
dodgenitto
Record Breaker
Joined: Dec 2007
Posts: 1,282
Likes: 0
From: Fairplay Colorado
Default

I do believe so! Lifting the body off the frame 3" should not get in the way of your suspension lift.
 
Reply
Old Dec 18, 2008 | 07:12 PM
  #34  
WeightLifter500's Avatar
WeightLifter500
Thread Starter
|
Veteran
Joined: Aug 2008
Posts: 343
Likes: 0
From: Chicago
Default

well that is a good thing. Hopefully that set up will clear the 38x14.5's. lol
 
Reply
Old Dec 18, 2008 | 07:21 PM
  #35  
nickahern1's Avatar
nickahern1
Record Breaker
Joined: Sep 2006
Posts: 1,120
Likes: 0
From: NH
Default

hey weightlifter 4 wheel parts is selling the 4.5 inch suspension lift for 06+ trucks for $860 right now
http://www.4wheelparts.com/Lift-Kits...pn=SKYD501MK-H
 
Reply
Old Dec 18, 2008 | 08:08 PM
  #36  
nickahern1's Avatar
nickahern1
Record Breaker
Joined: Sep 2006
Posts: 1,120
Likes: 0
From: NH
Default

neverrmind upon looking into it further its for a megacab. DAMNIT.....
they make nothing good for lifts on a 1500. where did you find the rancho kit?
 
Reply
Old Dec 18, 2008 | 08:22 PM
  #37  
HammerZ71's Avatar
HammerZ71
Administrator
Joined: Jul 2007
Posts: 24,686
Likes: 21
From: South Georgia/East Florida
Default

4 wheel parts for $1500 with free shipping a 4 free Rancho RS9000x shocks. But also a different kit as my '04 has a torsion bar IFS front end, where you '06+ guys are coil over IFS.
We all are really on the short end with our weak IFS systems, the process is stronger, cheaper and easier to install on SFA trucks. Lets get up a group bye on 2500 CTD 4x4s. I'm sure Chrysler would cut us a hot deal with the way the auto industry is now if we could scrape up a dozen or so buyers...

Went to dealership today for an Xmas present for my mom for her '08 Grand Caravan. New '08 2500 CTD 4x4 on the lot, loaded with $48k sticker was on sale for $31,995! Shame of it is, I'd not get more than about $12k for my '04 Laramie with 38k miles and $8k in mods on it...
 
Reply
Old Dec 18, 2008 | 08:36 PM
  #38  
dodgenitto's Avatar
dodgenitto
Record Breaker
Joined: Dec 2007
Posts: 1,282
Likes: 0
From: Fairplay Colorado
Default

Originally Posted by HammerZ71
4 wheel parts for $1500 with free shipping a 4 free Rancho RS9000x shocks. But also a different kit as my '04 has a torsion bar IFS front end, where you '06+ guys are coil over IFS.
We all are really on the short end with our weak IFS systems, the process is stronger, cheaper and easier to install on SFA trucks. Lets get up a group bye on 2500 CTD 4x4s. I'm sure Chrysler would cut us a hot deal with the way the auto industry is now if we could scrape up a dozen or so buyers...

Went to dealership today for an Xmas present for my mom for her '08 Grand Caravan. New '08 2500 CTD 4x4 on the lot, loaded with $48k sticker was on sale for $31,995! Shame of it is, I'd not get more than about $12k for my '04 Laramie with 38k miles and $8k in mods on it...

He has 2005 so he has a torsion front end.

4 wheel parts has 4-5 different 4" Rancho suspension lifts for the 2005. The price ranges depending on what color and what shocks?? And the Rancho lifts are 4" front and 2.5" rear so it levels your truck as well!
 

Last edited by dodgenitto; Dec 18, 2008 at 08:54 PM.
Reply
Old Dec 18, 2008 | 08:44 PM
  #39  
HammerZ71's Avatar
HammerZ71
Administrator
Joined: Jul 2007
Posts: 24,686
Likes: 21
From: South Georgia/East Florida
Default

Originally Posted by dodgenitto
He has 2005 so he has an IFS
Oops, sorry bout that. But I think you mean Torsion Bar, all of us 1500 3rd genner's have IFS. So many have responded to this thread I was to lazy to go back to the first post, thought I was responding to someone with an '06. My bad...
 
Reply
Old Dec 18, 2008 | 08:46 PM
  #40  
nickahern1's Avatar
nickahern1
Record Breaker
Joined: Sep 2006
Posts: 1,120
Likes: 0
From: NH
Default

i never realized he had a 05.
they do not make anything but a 6 inch lift for the 06-up or at least i canot find one. oh well ill do the BL in the spring anyways. i dont go offroad as much as id like.
 
Reply



All times are GMT -4. The time now is 09:10 PM.