When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
kind of silly but did you make sure you installed them in straight? i had a little trouble getting mine in correctly making sure i got all the notches in right lol
On my 06 there is a little hex screw next to each headlight (i.e. the side that is closest to the radiator). This is the screw that will adjust your lights up and down. I am not 100% on the 05's though....
I have gotten with Silverstar about this. They could not tell me why this happened. They sent me another pair and they do the same thing. I put the extra pair in my wife's Caliber and they did the same thing there. I adjusted them up.
On the Ram, it seems that by adjusting the hex screw on the front, just inside the hood, that they moved out to the side and not straight up. I put them back (counted turns).
Any update on this?
This is the only adjustment that I can find. I may try again, parked out in the street.
Also, I would go to www.sylvania.com and to automotive lighting. Then contact them by e-mail asking about this. They told me to have anyone having this same problem to contact them.
im having kind of the same problem on my 04. one of my headlights points higher than the other and i cant find a vertical adjustment any where! im beginning to think there isnt one. but that is absolutely ludicrous(spl?!)!!