DodgeForum.com

3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

04 4.7L P0068 and P0300 Codes

Thread Tools
 
Search this Thread
 
Old Feb 8, 2023 | 09:37 PM
Share
  #31  
fj5gtx's Avatar
fj5gtx
Record Breaker
Joined: Sep 2007
Posts: 1,810
Likes: 105
From: PA
Default
Spend a few bucks and put a new oil pump in there, that one has 225k miles on it and was putting up with low oil conditions.... Its siting right there out in the open.
 
Reply
0
Old Feb 10, 2023 | 05:30 PM
Share
  #32  
racerxv6's Avatar
racerxv6
Thread Starter
|
Veteran
10 Year Member
Liked
Loved
Community Favorite
Joined: Dec 2012
Posts: 286
Likes: 27
From: Upstate SC
Default
Originally Posted by fj5gtx
Spend a few bucks and put a new oil pump in there, that one has 225k miles on it and was putting up with low oil conditions.... Its siting right there out in the open.
ya, killin me.....I was thinking about it and now you threw me over the edge....I'm already at $1600 what's another $78...
 
Reply
0
Old Feb 10, 2023 | 05:44 PM
Share
  #33  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,480
Likes: 4,223
From: Clayton MI
Default
Originally Posted by racerxv6
ya, killin me.....I was thinking about it and now you threw me over the edge....I'm already at $1600 what's another $78...
One thing that we are REALLY good at here, is spending your money.
 
Reply
1
Old Feb 10, 2023 | 06:01 PM
Share
  #34  
fj5gtx's Avatar
fj5gtx
Record Breaker
Joined: Sep 2007
Posts: 1,810
Likes: 105
From: PA
Default
Originally Posted by racerxv6
ya, killin me.....I was thinking about it and now you threw me over the edge....I'm already at $1600 what's another $78...
AGhhhhhh can't help myself... .dingleball ($70), bearings ($60), and std ring set ($50), and you got a like new engine... wheewww.... sorrry!
 
Reply
0
Old Feb 10, 2023 | 06:11 PM
Share
  #35  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,480
Likes: 4,223
From: Clayton MI
Default
Originally Posted by fj5gtx
AGhhhhhh can't help myself... .dingleball ($70), bearings ($60), and std ring set ($50), and you got a like new engine... wheewww.... sorrry!
No you aren't.
 
Reply
0
Old Feb 11, 2023 | 10:12 AM
Share
  #36  
racerxv6's Avatar
racerxv6
Thread Starter
|
Veteran
10 Year Member
Liked
Loved
Community Favorite
Joined: Dec 2012
Posts: 286
Likes: 27
From: Upstate SC
Default
Stop, that's enough....ya'll are too much....just waiting on everything to come back home....today I will be premiering her up. Cleaning everything and getting her ready to accept parts.....
 
Reply
0
Old Feb 11, 2023 | 10:14 AM
Share
  #37  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,480
Likes: 4,223
From: Clayton MI
Default
Ok, one last shot over the bow here.... Are you replacing the timing chain and gears??
 
Reply
0
Old Feb 13, 2023 | 08:16 PM
Share
  #38  
racerxv6's Avatar
racerxv6
Thread Starter
|
Veteran
10 Year Member
Liked
Loved
Community Favorite
Joined: Dec 2012
Posts: 286
Likes: 27
From: Upstate SC
Default
Originally Posted by HeyYou
Ok, one last shot over the bow here.... Are you replacing the timing chain and gears??
Yes, Cloyes already purchased and waiting.
 
Reply
0
Old Feb 19, 2023 | 07:46 AM
Share
  #39  
racerxv6's Avatar
racerxv6
Thread Starter
|
Veteran
10 Year Member
Liked
Loved
Community Favorite
Joined: Dec 2012
Posts: 286
Likes: 27
From: Upstate SC
Default
Machine shop called Friday. Parts and testing comes out to $1,240 for the pair. Should be completed by this Friday.
 
Reply
0
Old Feb 19, 2023 | 09:10 AM
Share
  #40  
fj5gtx's Avatar
fj5gtx
Record Breaker
Joined: Sep 2007
Posts: 1,810
Likes: 105
From: PA
Default
Originally Posted by racerxv6
Machine shop called Friday. Parts and testing comes out to $1,240 for the pair. Should be completed by this Friday.
Interesting, what parts and new and what work is going to be performed?
 
Reply
0



Advanced Search
Reply Closed Thread Share
Forum Jump

All times are GMT -4. The time now is 11:06 PM.