hey christian, i think you might have it mixed up a little bit.

in my tuner.

the torque management settings and shift schedule settings are 2 seperate settings.

my tuner is set up with "superchips" settings for the shift schedule, but to adjust the torque management to 8% you have set the TM to "user" to be able to adjust them...

 

It's overlap of corresponding up and downshifts you have to be concerned about. Example: 1up and 2dn , 2up and 3 dn, etc.

The schedules on the server are fine.


Sil

 

you are correct, i left that out, my bad. That is the way i have it set up

 

ok, just re tuned. i am running 93 oct tune with superchips shift schedule. but user settings on WOT torque management. i have them all set at 8%.

honestly, i cant tell a whole lot of differance on WOT runs from when it was set at "superchips" torque man. settings.

SILSHEMI.

question does the part throttle torque m adjust the same way?

 

also just a heads up i was told by superchip techs that once you download the trans option it voids the warranty on the cortex

 

I updated my turner two nights ago. I went out to today and didn't see any new optins. Where should I be looking for it?

 

Did you enter the code TRANS90? It expires tomorrow at 10:00 AM EST.

JoeHemi was nice enough to make a YouTube video on how to do the upgrade.

http://www.youtube.com/watch?v=dgnWZAjuDFY


Sil

 

LAST CALL. The free trans options coupon will expire at 10:00AM EST Friday May 7th!

The coupon code is: TRANS90

After tomorrow, it's a $39.95 upgrade.


Thanks,

Sil

 

No I was wondering if the headers would make the truck run to lean causing detionation. So before I thow money at buying headers just wanted to make sure there would be no problems.

 

Man this really sucks, not getting my truck back from the dealer till tommorow. They had my truck a perfect 72 hours SOB