Dodge/Ram Diesel Tech Discussions on all generations of Cummins Diesel powered Rams plus the new Eco Diesel

Exhaust system advice

Thread Tools
 
Search this Thread
 
  #1  
Old 11-25-2007, 09:15 PM
40DodgeDieselQuadwtf's Avatar
40DodgeDieselQuadwtf
40DodgeDieselQuadwtf is offline
Thread Starter
Join Date: Nov 2007
Location:
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default Exhaust system advice

I have an 04 2500 LWB, I have already installed an Airraid air filter, and Banks 6 gun. I want to put on an exhaust with a single tip, any recommendations? And where do I buy it?
 
  #2  
Old 11-25-2007, 09:18 PM
JimmyDiablo's Avatar
JimmyDiablo
JimmyDiablo is offline
Champion
Join Date: Dec 2006
Location: Tolleson, Az
Posts: 4,360
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Exhaust system advice

There are many places and many available options. I am still stock but I have heard people having great results with the aero 4040 (4" exhaust) it depends on what you are looking for. performance, sound, smoke.
 
  #3  
Old 11-25-2007, 09:25 PM
40DodgeDieselQuadwtf's Avatar
40DodgeDieselQuadwtf
40DodgeDieselQuadwtf is offline
Thread Starter
Join Date: Nov 2007
Location:
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Exhaust system advice

I am looking for performance and improvedmileage. It would be nice to get both
 
  #4  
Old 11-25-2007, 09:27 PM
JimmyDiablo's Avatar
JimmyDiablo
JimmyDiablo is offline
Champion
Join Date: Dec 2006
Location: Tolleson, Az
Posts: 4,360
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Exhaust system advice

more people with exhaust will chime in. probably tomorrow as only a few are online right now. normally there are quite a few on this site.
 
  #5  
Old 11-25-2007, 09:29 PM
Aero Ram's Avatar
Aero Ram
Aero Ram is offline
All Star
Join Date: Dec 2006
Location: Oklahoma (Stuck in Florida)
Posts: 890
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Exhaust system advice

I've got an 06 w/factory 4" just removed the muffler and left the cat...nice deep tone no bad drone on the highway, helped with throttle response too

Do you got a 04 or 04.5 that would be a diffence in 3.5" and 4" exhaust and if you have a CAT or not....
 
  #6  
Old 11-25-2007, 09:30 PM
energinerbuzzy's Avatar
energinerbuzzy
energinerbuzzy is offline
Banned
Join Date: Nov 2007
Posts: 1,100
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Exhaust system advice

ORIGINAL: jimmydaleo

There are many places and many available options. I am still stock but I have heard people having great results with the aero 4040 (4" exhaust) it depends on what you are looking for. performance, sound, smoke.
I am assuming your talking about "your exhaust is still stock" I did see the bad *** burnout video ya know!
 
  #7  
Old 11-25-2007, 09:32 PM
JimmyDiablo's Avatar
JimmyDiablo
JimmyDiablo is offline
Champion
Join Date: Dec 2006
Location: Tolleson, Az
Posts: 4,360
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Exhaust system advice

ORIGINAL: energinerbuzzy

ORIGINAL: jimmydaleo

There are many places and many available options. I am still stock but I have heard people having great results with the aero 4040 (4" exhaust) it depends on what you are looking for. performance, sound, smoke.
I am assuming your talking about "your exhaust is still stock" I did see the bad *** burnout video ya know!
Yea Exhaust stock. as far as performance all I have is the diablo sport predator and it was set on economy setting for that burn out. I have plans for further upgrades. but those are top secret.
 
  #8  
Old 11-25-2007, 09:37 PM
Aero Ram's Avatar
Aero Ram
Aero Ram is offline
All Star
Join Date: Dec 2006
Location: Oklahoma (Stuck in Florida)
Posts: 890
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Exhaust system advice

Come on Jimmy we won't tell [sm=ts.gif]
 
  #9  
Old 11-25-2007, 09:40 PM
JimmyDiablo's Avatar
JimmyDiablo
JimmyDiablo is offline
Champion
Join Date: Dec 2006
Location: Tolleson, Az
Posts: 4,360
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Exhaust system advice

I am going to change my muffer bearings to high performance sealed ball bearings, Going to gap my plugs at .54 as oppose to .44, maybe change my cap and rotor and add 9mm wires. That should help
 
  #10  
Old 11-25-2007, 09:46 PM
energinerbuzzy's Avatar
energinerbuzzy
energinerbuzzy is offline
Banned
Join Date: Nov 2007
Posts: 1,100
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Exhaust system advice

I thought about muffler bearings too. In fact last week I added some stainless bearings but they all blew out at around 80 mph. Cost me an insurance claim with the jackass behind me in the ferd
 


Quick Reply: Exhaust system advice



All times are GMT -4. The time now is 06:20 PM.