tach-o-meter install ??
#1
#2
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
I think you would be able to mount a cam position sensor to run your tach. Since you have no electronics though... you'd really have to know what you were doing as there would be voltage issues you'd need to know how to deal with. It would be a complete custom job.
#5
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
Remove the little dash panel just below the steering column. Looking through the opening, to the left of the column ~
![Name: OEMTachConnectorLocation.jpg
Views: 1132
Size: 34.9 KB](https://dodgeforum.com/forum/attachments/dodge-ram-diesel-tech/122623d1501481582-tach-o-meter-install-oemtachconnectorlocation.jpg)
The OEM factory tachometer plug offers the following:
- 18ga Black = +12vdc for gage lights
- 20ga Orange = 12vdc Common
- 18ga Red = Switched +12vdc
- 20ga Grey w/light blue tracer = Tachometer Signal From PCM
Hope this helps.
![Name: OEMTachConnectorLocation.jpg
Views: 1132
Size: 34.9 KB](https://dodgeforum.com/forum/attachments/dodge-ram-diesel-tech/122623d1501481582-tach-o-meter-install-oemtachconnectorlocation.jpg)
The OEM factory tachometer plug offers the following:
- 18ga Black = +12vdc for gage lights
- 20ga Orange = 12vdc Common
- 18ga Red = Switched +12vdc
- 20ga Grey w/light blue tracer = Tachometer Signal From PCM
Hope this helps.
![Smile](https://dodgeforum.com/forum/images/smilies/smile.gif)
#7
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
I usedthe ISSPRO Tachometer in my heap (0~4000RPM, P/N ~ R5503).
If you choose to go this route, DO NOT purchase the companion ISSPRO hook-up harness. It is a universal harness for the ISSPRO line. The instructions as provided are bass-ackward and if you can figure it out without ruining stuff, you'll learn you don't need it at all. Just run the wires directly from the OEM connector to the tach.
![Name: CoulumnMountedTachometer.jpg
Views: 624
Size: 40.7 KB](https://dodgeforum.com/forum/attachments/dodge-ram-diesel-tech/122622d1501481582-tach-o-meter-install-coulumnmountedtachometer.jpg)
ISSPRO also offers a 3000rpm model if you're that slow.
If you choose to go this route, DO NOT purchase the companion ISSPRO hook-up harness. It is a universal harness for the ISSPRO line. The instructions as provided are bass-ackward and if you can figure it out without ruining stuff, you'll learn you don't need it at all. Just run the wires directly from the OEM connector to the tach.
![Name: CoulumnMountedTachometer.jpg
Views: 624
Size: 40.7 KB](https://dodgeforum.com/forum/attachments/dodge-ram-diesel-tech/122622d1501481582-tach-o-meter-install-coulumnmountedtachometer.jpg)
ISSPRO also offers a 3000rpm model if you're that slow.
![Big Grin](https://dodgeforum.com/forum/images/smilies/biggrin.gif)
Trending Topics
#8
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
BC847
would you be so kind as to either post or link the specs for your rig.
I am interested, especially since it is a 1st gen like mine![Big Grin](https://dodgeforum.com/forum/images/smilies/biggrin.gif)
pics are nice too![Wink](https://dodgeforum.com/forum/images/smilies/wink.gif)
I will look for the ISSPRO tach..
thanks for the help!!
any idea on my dilema with the throttle???
https://dodgeforum.com/m_1129557/tm.htm
would you be so kind as to either post or link the specs for your rig.
I am interested, especially since it is a 1st gen like mine
![Big Grin](https://dodgeforum.com/forum/images/smilies/biggrin.gif)
pics are nice too
![Wink](https://dodgeforum.com/forum/images/smilies/wink.gif)
I will look for the ISSPRO tach..
thanks for the help!!
any idea on my dilema with the throttle???
https://dodgeforum.com/m_1129557/tm.htm
#9
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
Where did you get your Tach mount for your 93? I read your recommendations on your Tach install and want to do the same. I'm going to go with the ISS proR5503 Tach like you did, but want the smooth look that yours has with the collum mount. Any sources on the Collum mount would be greatly appreceated. Thanks! ![Smile](https://dodgeforum.com/forum/images/smilies/smile.gif)
92 Cummins 4x4 55,000 original miles
99 Neon R/T
74 Dart 340 swinger
![Smile](https://dodgeforum.com/forum/images/smilies/smile.gif)
92 Cummins 4x4 55,000 original miles
99 Neon R/T
74 Dart 340 swinger
#10