Beasty got fass transplanted this afertoon,i was kinda happy
but when i bleeded the injector it was fine,fuel to the injectors so it was all god but engine crank and crank and not a sight
of a start..... when the key is at on position i hear the fass,its really noisy....

any clues?
i need this truck to run,this is my work truck[:@]

 

Did you crack all of the injectors, or just the first one?

If you've cracked all of the injectors and fuel is comming out of them and you hear the FASS running I'm kinda stumped.

 

i craked 1-2-3-4 and fuel is coming out of them,i run out of time so i had to leave else my wife would kill me :P
tomorrow ill bleeds 5-6 to make sure but last time i let air enter my fuel line i only bled 1-3-4 and it was fine....
maybe ill try some ether???

 

.

 

one you get the first 3-4 cylinders bled she should run.

do you have fuel to the VP44???

 

Drew I've been having problems getting these things to bleed properly without loosening all the lines at once. Maybe the same situation that woli is having. Loosen all the lines and crank on it a few times, then tighten them and see if it will fire.

 

NOOOOOOOOOOOOOOOOOOOOOOOOOOOO !!!!!!!!!!!!!!!!!!!!!!

Idon't think ether and that heater grid are gonna get along at all !!

 

Mayfair you nailed that, woli dont ever use ether on a diesel with any kind of intake heater unless you want to scatter that engine over a block radius. Trust me, I've seen it happen, not a pretty site. That guy is lucky he's alive. And needless to say, that engine never did run right after that.

 

well i didnt thinked about that guys lol,maybe ur right,i wont try ether whitout disconnecting heater grid...
anyway im getting fuel leaking to the injector when i crack them but i think not all...
maybe there is still some air into the line and into the vp,,the fuel i see was what left into the vp...
ill crak the vp line and after the injectors,maybe that better
and for noisy fass???
anyone can hear its pump when power is applyed???

 

if your getting fuel to the VP44, and have 4 lines bled out, that engine should run, VERY rough, but it will run.

I'm wondering if your VP44 has finaly gave up the ghost.