DodgeForum.com
0 2017/02/05 11:52:09
0 2017/02/05 11:52:35
0 2017/02/05 11:53:37
0 2017/02/05 11:53:56
0 2017/02/05 12:12:29
0 2017/02/05 12:12:45
0 2017/02/05 12:17:11
0 2017/02/05 13:34:00
0 2017/08/28 16:39:21
0 2017/08/28 16:39:55
Has an almost unmolested dash, with the factory radio and A/C evap
Has an almost unmolested dash, with the factory radio and A/C evap
0 2018/04/23 17:43:34
The tailgate is in great shape, just a few bumps and bruises
The tailgate is in great shape, just a few bumps and bruises
0 2018/04/23 17:44:06
This is the 67 grill and bumper that are supposed to be on the truck. I plan on moving the entire front end over, fenders, hood and all
This is the 67 grill and bumper that are supposed to be on the truck. I plan on moving the entire front end over, fenders, hood and all
0 2018/04/23 17:44:55
This is the alternator in Isaacs truck. Is this internally or externally regulated?
This is the alternator in Isaacs truck. Is this internally or externally regulated?
0 2018/04/29 17:28:48
Here is the back. It has the one large post, then two smaller ones. Anyone know anything about this alternator?
Here is the back. It has the one large post, then two smaller ones. Anyone know anything about this alternator?
0 2018/04/29 17:29:44
Got the old dash out. It had some issues, mainly a giant hole where someone used what appeared to be a chisel or an ax to cut install a radio.
Got the old dash out. It had some issues, mainly a giant hole where someone used what appeared to be a chisel or an ax to cut install a radio.
0 2018/04/29 17:31:30
Test fitting the 67 grill. I will have to swap the hood, and maybe the radiator support. Ill have to look. Im prepared to swap the whole front end. I like it.
Test fitting the 67 grill. I will have to swap the hood, and maybe the radiator support. Ill have to look. Im prepared to swap the whole front end. I like it.
0 2018/04/29 17:33:04
The old seat. Im not sure if its original, but it looks old. It appears to be in great condition, other than a few rips.
The old seat. Im not sure if its original, but it looks old. It appears to be in great condition, other than a few rips.
0 2018/05/05 11:43:45
Not too bad, after a little cleaning.
Not too bad, after a little cleaning.
0 2018/05/05 11:45:12
Got the dash out. It has some extrs holes, but they are small, nothing to worry about. The radio says Plymouth on it. The dash box had been soaked in oil, so it fell apart coming out. The pad is there, but drawn up. Ill have it recovered.
Got the dash out. It has some extrs holes, but they are small, nothing to worry about. The radio says Plymouth on it. The dash box had been soaked in oil, so it fell apart coming out. The pad is there, but drawn up. Ill have it recovered.
0 2018/05/05 11:46:01
Driver side fender off. I had to cut almost half the bolts out.
Driver side fender off. I had to cut almost half the bolts out.
0 2018/12/28 17:41:17
Everything is ready to go, to remove the engine. The cab will be first though. I think itll be easier.
Everything is ready to go, to remove the engine. The cab will be first though. I think itll be easier.
0 2018/12/28 17:42:16
The radiator support is almost perfect, no stripped bolts or dents. Its dirty, but nice and original.
The radiator support is almost perfect, no stripped bolts or dents. Its dirty, but nice and original.
0 2018/12/28 17:43:13
This is the last time this cab will be on this frame. Im going to keep the cab for repair parts. The green wagon on the frame will be how I move the cab around the yard. Ill also move the beds back and forth.
This is the last time this cab will be on this frame. Im going to keep the cab for repair parts. The green wagon on the frame will be how I move the cab around the yard. Ill also move the beds back and forth.
0 2018/12/28 17:44:11
Just some of the workmanship from the P.O. He cut the spring hangers, so now I have to figure something out. This is on Isaacs truck, and I plan to use the springs and 8-3/4 rearend
Just some of the workmanship from the P.O. He cut the spring hangers, so now I have to figure something out. This is on Isaacs truck, and I plan to use the springs and 8-3/4 rearend
0 2018/12/28 17:45:37
Isaacs truck patiently waiting for me to get the frame mods done so it can be put together.
Isaacs truck patiently waiting for me to get the frame mods done so it can be put together.
0 2018/12/28 17:47:28
Cab comes off. It wasnt too bad.
Cab comes off. It wasnt too bad.
0 2018/12/29 15:58:20
Without the engine hoist it would have been impossible. Money well spent.
Without the engine hoist it would have been impossible. Money well spent.
0 2018/12/29 15:59:05
I bought one of those garden carts just for this. It worked well. It is a bit wobbly.
I bought one of those garden carts just for this. It worked well. It is a bit wobbly.
0 2018/12/29 15:59:58
The NP435 comes out. It was heavy.
The NP435 comes out. It was heavy.
0 2018/12/29 16:01:19
The splice. It looks better now. We stopped to let it cool, and move to other things. We will probable finish tomorrow.
The splice. It looks better now. We stopped to let it cool, and move to other things. We will probable finish tomorrow.
0 2019/02/16 16:43:01
Bell housing had of a mouse nest. Im sure "it ran when it was parked", just like all of them. Hole in the radiator, empty gas tank, no clutch or brake fluid, all kinds of issues.
Bell housing had of a mouse nest. Im sure "it ran when it was parked", just like all of them. Hole in the radiator, empty gas tank, no clutch or brake fluid, all kinds of issues.
0 2018/12/29 16:02:13
Getting the boxing plates ready. This one is required for the IFS.
Getting the boxing plates ready. This one is required for the IFS.
0 2019/02/16 16:43:58
And the engine comes out. I have no ide what to do with it though. Im going to have to get rid of some of this stuff soon.
And the engine comes out. I have no ide what to do with it though. Im going to have to get rid of some of this stuff soon.
0 2018/12/29 16:04:32
With the plate welded (top only) and the motor mount tacked in, its looking better.
With the plate welded (top only) and the motor mount tacked in, its looking better.
0 2019/02/16 16:44:34
Its a little welder, but it worked pretty good. I have to get the right regulator for the argon, and we want to try it on 240v before we are finished. It did seem to struggle later in the day on 110v.
Its a little welder, but it worked pretty good. I have to get the right regulator for the argon, and we want to try it on 240v before we are finished. It did seem to struggle later in the day on 110v.
0 2019/01/27 06:25:20
We are boxed to the second cross member now. We are going to leave the next section out till we figure out a few more things, but continue on with the back portion. You can see how nice the welds are. Stephen is doing a great job.
We are boxed to the second cross member now. We are going to leave the next section out till we figure out a few more things, but continue on with the back portion. You can see how nice the welds are. Stephen is doing a great job.
0 2019/02/24 14:36:08
No turning back now. It wasnt as heavy as I figured. We braced it to make sure it wouldnt move on us.
No turning back now. It wasnt as heavy as I figured. We braced it to make sure it wouldnt move on us.
0 2019/01/27 06:26:56
Grind, cut and grind some more. We stunk the house up, and went through several cut wheels and grinder wheels.
Grind, cut and grind some more. We stunk the house up, and went through several cut wheels and grinder wheels.
0 2019/01/27 06:28:26
NO RAIN TODAY!. I pushed it out, and got the suspensions off. Here we are using the welding blanket to block the wind. It has been a crazy start of the year for weather.
NO RAIN TODAY!. I pushed it out, and got the suspensions off. Here we are using the welding blanket to block the wind. It has been a crazy start of the year for weather.
0 2019/02/24 14:37:33