DodgeForum.com
Sorry. This is the best I can find.
Sorry. This is the best I can find.
0 2022/10/29 17:42:12
0 2022/10/29 17:41:51
I cant believe I dont have a better picture, but this might do.
I cant believe I dont have a better picture, but this might do.
0 2022/10/29 17:29:12
0 2022/10/29 17:28:28
The gasket pushes right out if it isnt held in place with the MC.
The gasket pushes right out if it isnt held in place with the MC.
0 2022/10/03 11:05:27
Master cylinder flange is 9/32" tall. Thats a difference of 13/32". It would have never worked.
Master cylinder flange is 9/32" tall. Thats a difference of 13/32". It would have never worked.
0 2022/10/03 11:04:34
Booster hole is 31/32" deep without the gasket.
Booster hole is 31/32" deep without the gasket.
0 2022/10/03 11:04:07
No seal between them. And there isnt supposed to be one.
No seal between them. And there isnt supposed to be one.
0 2022/10/03 11:03:36
Bleeders are now on top. It sure makes bleeding the brakes easier.
Bleeders are now on top. It sure makes bleeding the brakes easier.
0 2022/06/21 15:25:38
The rod it came with and the one I made. The size difference is crazy. That would have never worked.
The rod it came with and the one I made. The size difference is crazy. That would have never worked.
0 2022/06/21 15:25:03
0 2022/06/04 16:07:47
0 2022/06/04 16:07:40
0 2022/06/04 16:07:29
0 2022/06/04 16:07:19
0 2022/06/04 16:07:11
Look past the steering wheel. Its going to go. I hate it. It looks cheap, and blocks the gauges.
Look past the steering wheel. Its going to go. I hate it. It looks cheap, and blocks the gauges.
0 2022/05/30 14:58:36
All nice and shiny. Has a new glove box also.
All nice and shiny. Has a new glove box also.
0 2022/05/30 14:58:04
Here you can see the F100 patiently awaiting it turn. I hope to install the 5 speed over the winter.
Here you can see the F100 patiently awaiting it turn. I hope to install the 5 speed over the winter.
0 2022/05/30 14:57:23
She needs a bath, but itll have to wait.
She needs a bath, but itll have to wait.
0 2022/05/30 14:57:05
The glovebox door. That isnt a smear in the bottom corner, it the reflection of a cloud overhead. She is sharp.
The glovebox door. That isnt a smear in the bottom corner, it the reflection of a cloud overhead. She is sharp.
0 2022/05/29 13:06:34
The dash and all the parts. The pictures dont do it justice. It is nice.
The dash and all the parts. The pictures dont do it justice. It is nice.
0 2022/05/29 13:06:04
Trans tunnel cover and all the switches installed and waiting. Just need the brakes sorted out before installing the dash.
Trans tunnel cover and all the switches installed and waiting. Just need the brakes sorted out before installing the dash.
0 2022/05/29 13:05:18
Wiring done, for the most part. Ive changed it a lot since it was installed, so if I get to do the 5.7 hemi later, Im redoing the wiring. It can look so much better than this.
Wiring done, for the most part. Ive changed it a lot since it was installed, so if I get to do the 5.7 hemi later, Im redoing the wiring. It can look so much better than this.
0 2022/05/29 13:04:04
And they are off. I have better tailgate retainers from the parts truck. You can see some of the lousy body work.
And they are off. I have better tailgate retainers from the parts truck. You can see some of the lousy body work.
0 2022/05/07 12:01:34
Easy out didnt touch them. They would not budge, so I had to get crazy.
Easy out didnt touch them. They would not budge, so I had to get crazy.
0 2022/05/07 12:00:48
Filler neck. Its temporary, but itll work.
Filler neck. Its temporary, but itll work.
0 2022/05/07 12:00:03
Looking a little more normal now. The wheels are out too far, so Ill go in maybe an inch both sides, Im not sure.
Looking a little more normal now. The wheels are out too far, so Ill go in maybe an inch both sides, Im not sure.
0 2022/04/09 13:40:33
I raised it up as well while I was under it. Ill raise the rear end a little too.
I raised it up as well while I was under it. Ill raise the rear end a little too.
0 2022/04/09 13:40:03
Quite a difference from the other pictures. Everything is set where it should be now.
Quite a difference from the other pictures. Everything is set where it should be now.
0 2022/04/09 13:39:26
Hood and bumper back on. I still have a ton of adjustments to do.
Hood and bumper back on. I still have a ton of adjustments to do.
0 2022/04/02 15:53:18
Thats about where she will sit. Ill add the spacers in the front. Thats exactly where I like it, with the wheel well line running through the tire. It might have to go up though.
Thats about where she will sit. Ill add the spacers in the front. Thats exactly where I like it, with the wheel well line running through the tire. It might have to go up though.
0 2022/04/02 15:51:44
The park brake handle. I went with the Lokar in black. It looks good and works well. I just need to adjust everything.
The park brake handle. I went with the Lokar in black. It looks good and works well. I just need to adjust everything.
0 2022/04/02 15:50:54
Park brake bracket. Ignore the weld on the inside. I put another on the outside because that one sucked. Notice one of the e-brake cables is longer? Ill fix that eventually.
Park brake bracket. Ignore the weld on the inside. I put another on the outside because that one sucked. Notice one of the e-brake cables is longer? Ill fix that eventually.
0 2022/04/02 15:49:36
You can see the hoses peaking out here.
You can see the hoses peaking out here.
0 2022/03/13 10:18:20
Inside shot. I still have stuff to mount and add, but the wheel is way up in that fender well.
Inside shot. I still have stuff to mount and add, but the wheel is way up in that fender well.
0 2022/03/12 11:26:33
The wheels are tucked about 3-4 inches in. I like it, but it may have to come out more.
The wheels are tucked about 3-4 inches in. I like it, but it may have to come out more.
0 2022/03/12 11:25:51
Personal opinion, but I think it looks best with the fender line cutting through the tire like this. Itll look better on the ground, but I still need under the truck
Personal opinion, but I think it looks best with the fender line cutting through the tire like this. Itll look better on the ground, but I still need under the truck
0 2022/03/12 11:24:55
Sitting nice and low. I like it, but it may be too much. Ill drive it and see.
Sitting nice and low. I like it, but it may be too much. Ill drive it and see.
0 2022/03/12 11:24:24
Inside mount. Ill add rivnuts to mount it, and replace those existing bolts for something that doesnt stick out as far.
Inside mount. Ill add rivnuts to mount it, and replace those existing bolts for something that doesnt stick out as far.
0 2022/03/12 11:23:25
3rd brake light. This little sucker is bright
3rd brake light. This little sucker is bright
0 2022/03/12 11:23:02