speedodemeter and fuel gauge
#1
#2
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
does it still start and run?
If so, slap your dash with about the same force u'd use to slap your girl, and see if it comes back on.
If so, you get to resoder your instrimunt panal.
https://dodgeforum.com/forum/1st-gen...e-cluster.html
~Nate
If so, slap your dash with about the same force u'd use to slap your girl, and see if it comes back on.
If so, you get to resoder your instrimunt panal.
https://dodgeforum.com/forum/1st-gen...e-cluster.html
~Nate
#3
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
does it still start and run?
If so, slap your dash with about the same force u'd use to slap your girl, and see if it comes back on.
If so, you get to resoder your instrimunt panal.
https://dodgeforum.com/forum/1st-gen...e-cluster.html
~Nate
If so, slap your dash with about the same force u'd use to slap your girl, and see if it comes back on.
If so, you get to resoder your instrimunt panal.
https://dodgeforum.com/forum/1st-gen...e-cluster.html
~Nate
#5
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
https://dodgeforum.com/forum/1st-gen...er-repair.html
#7
Trending Topics
#8
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
Yes. when I did my wifes car i had to add solder to the pins. If you have a stedy hand you can add flux for a flawless connection with a fine tiped hobby paint brush, then add silver solder. Use a decent soldering iron also. none of the cool to the touch tip soldering irons, to me, do not seem reliable.
Last edited by DOHCgarrett t3; 01-27-2009 at 02:35 PM.