Originally Posted by merc225hp

I am working on one for you bud, the Mopar R/T cam's are too big with your 1.7 rr's.

So with your 1.7's max lift for you to look for is .450-.455 thats it no more. Max lift with stock springs is .480 you need to be under that a little bit.



Those cam's can be found under Crane Cams part numbers, they did a lot of work for Mopar back in the day for these motor's.

So if I was to suggest that cam the (R/T +10) with his 1.7 rr's he would be one upset guy with me when he bent all his pushrods or worse.

Cranes part numbers.

R/T cam grind number 2030 rpm 1200-5200 part number 704121 .458 and .467

R/T+10 Grind number HR-208/292-2S1-10 rpm range 1600-5600 part number 708501* .467 and .482

http://www.cranecams.com/164-165.pdf

Originally Posted by QuadCabLuv

Originally Posted by Jigabop

this vehicle is full of fail...especially the fact that he is from this state

and the tow mirrors...