When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Good question, let you know Saturday. Truck hasn't left the drive way yet this week, lol. From what I've read and the guy at Summit they will ride rough for a few hundred miles till they break in.
Took off the massive 6" coil spacers and put on a set of 2" FatBob's spacers. went from about 8" in front down to 5-6".
The front has a pretty aggressive rake now.
Good question, let you know Saturday. Truck hasn't left the drive way yet this week, lol. From what I've read and the guy at Summit they will ride rough for a few hundred miles till they break in.
Originally Posted by uplandhawaii
Took off the massive 6" coil spacers and put on a set of 2" FatBob's spacers. went from about 8" in front down to 5-6".
The front has a pretty aggressive rake now.
Ordered my pkenum kit and intake bolts. now I may hace a biased opinion on highes cuz Ive heard so much **** about them but they are are becoming a hassle to deal with. Anyways going to the dealer to get Pvc valve then gunna grab some (first time trying them) champion truck copper spark plugs with new cap,and rotors and wires. Also the pcs for my vac leak. Hoping saturday to sweeten the wife up with an outing for breakfast with the kids so I can work on my truck with all the new aquired things if the plenum isnt here ill do vac lines compression and plasti dip the rims
Took off the massive 6" coil spacers and put on a set of 2" FatBob's spacers. went from about 8" in front down to 5-6".
The front has a pretty aggressive rake now.
Great first post introduction!! Complete with photo.
Originally Posted by BackwoodsRam
I can't believe they make a spacer that big
indeed.
Originally Posted by uplandhawaii
Not sure of the brand but here it is.
holy *****!! lol
It appears to be plastic looking? If you have a chance to take picture of the rest of it, please do. Just interested in its configuration.
You should see thr topguncustoms 6" rear block now that thing would be scary! Lol
Usually daystar coil spacers are a rubbery-plastic like that. Good thing you removed them ive heard alot of stories about the rubber spacers dry rotting and splitting down the middle!
Tried to get arid of this hissing noise coming from the engine when I gun the throttle....replace throttle body gasket and cleaned IAC and air filter while i was at it....still hissing like before but a little less this time...oh well...