2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

8" lift kit question

Thread Tools
 
Search this Thread
 
  #31  
Old 10-31-2010 | 10:00 PM
Gav1n8's Avatar
Gav1n8
Veteran
Joined: Aug 2008
Posts: 310
Likes: 0
From: Alma, AR
Default

yeah I'm with you on building a pack I just think your going a little far by saying there sketchy. I know a bunch of people on PS forum that love them. And I think its a much better solution than AAL and blocks for sure.

Plus zero rates fix the problem. Wouldn't say its a bandaid.

Lol dodge1500 I already said that...
 
  #32  
Old 10-31-2010 | 11:55 PM
TheBigRedOne's Avatar
TheBigRedOne
Registered User
Joined: May 2010
Posts: 914
Likes: 0
From: The Box
Default

Just because people love it doesn't mean its the right way to do it. No fault on you, I've been building suspension for over 10 years. I know what works, and what doesn't. Why do it halfass when you can do it the right way? 8 inches of lift is getting into the realm of ridiculous already, and using spacers/blocks/add a leaf to attain that height is just asking for a serious accident.

Just my .2
 
  #33  
Old 11-01-2010 | 12:41 AM
dodge15004x45.9's Avatar
dodge15004x45.9
Legend
Joined: Nov 2008
Posts: 7,950
Likes: 2
From: Malvern Pa - Canadensis Pa
Default

5" is pretty much point less you can't really use your truck with eazy like stock height.
 
  #34  
Old 11-01-2010 | 12:17 PM
HeyYou's Avatar
HeyYou
Administrator
Joined: Apr 2010
Posts: 82,852
Likes: 3,444
From: Clayton MI
Default

Originally Posted by TheBigRedOne
Buy a used G50 pack and beef it up with Blazer leafs. Cost me under $100 to do that.

I don't see how that is any different than an AAL. Taking a spring pack, and adding leaves to it?

What's a "G50"?
 
  #35  
Old 11-01-2010 | 01:28 PM
TRTPLAYER's Avatar
TRTPLAYER
Thread Starter
|
Rookie
Joined: Jun 2010
Posts: 87
Likes: 0
From: Redmond, Oregon
Default

the skyjacker 7" kit comes with add a leafs and blocks so what difference is it if i use blocks and a add a leaf in the rear i dont see a problem with it and coil spacers why cant you put them on lift springs its not really different from when ou just stick a 2" soil spacer in for the leveling kit? but what should i do to make it a good kit that wont f???ing fall apart. i only paid 200 for everything so not like i got ripped off
 
  #36  
Old 11-01-2010 | 02:21 PM
Gav1n8's Avatar
Gav1n8
Veteran
Joined: Aug 2008
Posts: 310
Likes: 0
From: Alma, AR
Default

Well what are you using this lift for? If your just gunna drive down the road and look cool and throw in a couple of dirt roads then aals are okay. If your going to use it to flex then your going to have to build a pack or do a shackle flip to get the *** up high enough.

coil springs and spacer that high up are meant to work like that. When that high, you need a taller spring and no spacer. 2500 coils are approximately 1.5-2 inches taller than 1500 coils. so get some 2500 coils that are 7 inch lift and that will net you 8.5-9 inches of lift on a 1500 for the front.

Its not going to F up as long as your not ramping it and junk... If your just wanting to dick around with buddys you will be fine.
 
  #37  
Old 11-01-2010 | 04:19 PM
TRTPLAYER's Avatar
TRTPLAYER
Thread Starter
|
Rookie
Joined: Jun 2010
Posts: 87
Likes: 0
From: Redmond, Oregon
Default

like the truck is mainly a dialy drive from my house to shcool and take it off a could dirt roads here and there but no off roading stuff just high way use mostly
 
  #38  
Old 11-01-2010 | 04:29 PM
Gav1n8's Avatar
Gav1n8
Veteran
Joined: Aug 2008
Posts: 310
Likes: 0
From: Alma, AR
Default

then put coils and spacer will be fine for the front. Use aals for the back or a skackle flip.
 
  #39  
Old 11-02-2010 | 12:05 AM
TRTPLAYER's Avatar
TRTPLAYER
Thread Starter
|
Rookie
Joined: Jun 2010
Posts: 87
Likes: 0
From: Redmond, Oregon
Default

thanks everyone for all the help
 
  #40  
Old 11-02-2010 | 03:50 PM
willstruck's Avatar
willstruck
Professional
Joined: Jan 2009
Posts: 246
Likes: 1
From: Temecula, CA
Default

So, what is a g50 pack, and blazer leaves? You guys got me interested in building a spring pack to lift my 2500. I don't want a big lift, just a few inches, but I want to get as much flex as I can out of it.

Is there a guide somewhere online for building leaf packs?
 


Quick Reply: 8" lift kit question



All times are GMT -4. The time now is 06:51 AM.