trans problem
#41
#43
#44
#46
Put your mouse cursor on the pic. A little window will open. Click on the IMG code. When you do that, you'll see it say copied. Then come here and paste.
And take more pics following the lines. I want to see the cooler you are talking about. And do the lines go in between the front of the rad and the ac condenser?
And take more pics following the lines. I want to see the cooler you are talking about. And do the lines go in between the front of the rad and the ac condenser?
Last edited by zman17; 10-09-2011 at 12:34 PM.
#49
The previous owner may have bypassed the radiator cooling becasue there may have been a leak or other problem. Since the ports to the radiator ports are not plugged, I would not connect back to them without cleaning the radiator out very good.
Preferred (imho) would have been to install the aftermarket cooler between the upper radiator connection line and the radiator.
A lot of people add the aftermarket cooler to increase cooling capacity over the original design, expecially if truck will be used for towing or heavy load situations.
It looks like they also cut out the check valve.
Preferred (imho) would have been to install the aftermarket cooler between the upper radiator connection line and the radiator.
A lot of people add the aftermarket cooler to increase cooling capacity over the original design, expecially if truck will be used for towing or heavy load situations.
It looks like they also cut out the check valve.