interesting throttle body, I checked it out on ebay, but, wasn't sure if the 3 sensors will bolt up to it TPS, IAC, and MAP??? Im assuming some fabrication IS required??

 

I thought because it is only there to flow air anyhow the CFM rating really didn't matter except that you don't want to choke the engine by to small of CFM. I guess we will see once I have it together and running. I know my 52mm TB isn't going to be big enough and for the price I figure it was worth a try.

44Dak, As for sensors I don't know either only time will tell. I will see what works. It is suppose to be here on Monday and then I can answer more questions.

 

Real possibility I am just being an alarmist due to being stuck back in my carburetor days.... when OVER carbing and engine was just as bad as under-carbing....

 

Hey Wildman! Any updates on the build?

 

The stock sensors will not bolt up to the TB. I have the vehicle models that do fit it. The fab part is going to be getting the throttle pedal and TV cables hooked up to it. If I can't get it to work I'll just end up getting a larger TB.

Jolly nothing new at this point as I'm waiting to have some funds free up so I can take the engine to the machine shop.

 

Okay folks just so you know I am selling my Air Gap intake and my Comp Cam cam.

Air Gap intake - https://dodgeforum.com/forum/user-cl...ap-intake.html

Comp Cam - https://dodgeforum.com/forum/user-cl...-camshaft.html

I've decided to go with a different intake & no it isn't an M1. You all will just have to wait til I get it and have some awesome pictures to post up. As for the cam I thought this cam would be enough for my engine but after much talking and research I have decided to get a cam from Hi-Po Tek . I might be selling my roller rockers also because he likes standard ratio rockers best with his cams. That has yet to be decided. I shooting for Sept as when I'll be taking the engine to the machine shop. Then depending on how long good weather holds out will decide on how long I can work on the engine before the cold weather makes me have to bag it up til spring.
If anyone out there wants to adopt me and give me a large trust fund I'll be glad to stand in family photos and such. Or if you have a rich sister, aunt, cousin that you want to marry off send me details.

 

You still haven't finished this thing?!

I'm working on a 360 2.0 at this point. Freshening it up, and swapping parts so I can drop it into my Dakota.

I've been waiting for years now to see thing thing running in your Jeep! I don't visit here often anymore. Too busy working my *** off to be on a computer all day.

Hope all is well with ya.

 

I'm using this one from F&B. Billet Aluminum and everything bolts up without modification.



Here it is on the motor

 

Redneck,
Things have gone sideways for me on this. First mine isn't a 360 anymore it is now a 408. Next is you just threw parts at your engine. You didn't do a full rebuild on it. And last is I have been going thru a nasty divorce over the past two years and didn't have any extra funds available. My responsibilities come first the Jeep comes second. It'll get done one day, I'm hoping by next spring but who knows.

Renardk764,
Yes I had looked at the 58mm tb from F&B. They do make some awesome stuff and if I wasn't going with something else I might have looked at their products.

 

Figured as much. Very interested to see what you end up with!