Cruise control
#32
#33
http://dodgeram.info/tsb/1996/24-01-96a.htm
cruise control servo on a 2006 is vacuum controlled. unless you can come up with an actual part number i really don't think i would trust another post from you. i have a feeling they used vacuum controlled servo's right up until the did away with the throttle cable all together at which point there is no servo at all on the trucks or nothing that would be compatible with the older setup. all your posts are pretty vague with very little fact and all that it does is confuse people.
cruise control servo on a 2006 is vacuum controlled. unless you can come up with an actual part number i really don't think i would trust another post from you. i have a feeling they used vacuum controlled servo's right up until the did away with the throttle cable all together at which point there is no servo at all on the trucks or nothing that would be compatible with the older setup. all your posts are pretty vague with very little fact and all that it does is confuse people.
#34
I'm not sure what it stands for but basically it's a problem that the consumers found and Dodge puts them out with a fix but you usually have to pay out off pocket.
No never had a lighter...yet. I plan on adding a lot of LED lights for when I go off road. It's a SEMA build. I would do how-tos on the stuff I do but sadly not a lot of people own these trucks anymore. IMO it's the best looking truck Dodge made.
You may have to go to a 2.5" lift spring (if they make them) what I have to do it get more leafs in the back of mine as to me the front sits a little higher.
its made by Rostra for a 2006 Ram, it's fully electronic and uses an electronic motor to move the cable. I do not have a part number. I was giving the guy a heads up within what is known. If you don't believe my posts or it's confusing to you, I am sorry for that. My truck was originally a Cummins so technically I could add the modern ECM from a 24V would just need a harness from Hotwire Auto.
http://dodgeram.info/tsb/1996/24-01-96a.htm
cruise control servo on a 2006 is vacuum controlled. unless you can come up with an actual part number i really don't think i would trust another post from you. i have a feeling they used vacuum controlled servo's right up until the did away with the throttle cable all together at which point there is no servo at all on the trucks or nothing that would be compatible with the older setup. all your posts are pretty vague with very little fact and all that it does is confuse people.
cruise control servo on a 2006 is vacuum controlled. unless you can come up with an actual part number i really don't think i would trust another post from you. i have a feeling they used vacuum controlled servo's right up until the did away with the throttle cable all together at which point there is no servo at all on the trucks or nothing that would be compatible with the older setup. all your posts are pretty vague with very little fact and all that it does is confuse people.
#35
http://dodgeram.info/tsb/1996/24-01-96a.htm
cruise control servo on a 2006 is vacuum controlled. unless you can come up with an actual part number i really don't think i would trust another post from you. i have a feeling they used vacuum controlled servo's right up until the did away with the throttle cable all together at which point there is no servo at all on the trucks or nothing that would be compatible with the older setup. all your posts are pretty vague with very little fact and all that it does is confuse people.
cruise control servo on a 2006 is vacuum controlled. unless you can come up with an actual part number i really don't think i would trust another post from you. i have a feeling they used vacuum controlled servo's right up until the did away with the throttle cable all together at which point there is no servo at all on the trucks or nothing that would be compatible with the older setup. all your posts are pretty vague with very little fact and all that it does is confuse people.
#36
I
its made by Rostra for a 2006 Ram, it's fully electronic and uses an electronic motor to move the cable. I do not have a part number. I was giving the guy a heads up within what is known. If you don't believe my posts or it's confusing to you, I am sorry for that. My truck was originally a Cummins so technically I could add the modern ECM from a 24V would just need a harness from Hotwire Auto.
its made by Rostra for a 2006 Ram, it's fully electronic and uses an electronic motor to move the cable. I do not have a part number. I was giving the guy a heads up within what is known. If you don't believe my posts or it's confusing to you, I am sorry for that. My truck was originally a Cummins so technically I could add the modern ECM from a 24V would just need a harness from Hotwire Auto.
#37
#39
When I first got it. The 3" block in the back was there with a 2" helper spring. The front had stock springs with a 2.5" in spacer. So I tool out the stock spring and spacer and put a 3" lifted coil spring and took the helper spring out and now the *** end sags 3/4" lower.
I'll take pics off the setup tomorrow and send em to u so u know what the deal is. I just want to have the 3" lift and body leveled out
I'll take pics off the setup tomorrow and send em to u so u know what the deal is. I just want to have the 3" lift and body leveled out
#40
From what I found out the truck was built for a work truck the floor was not made with carpet but with black vinyl type flooring instead. No clarification of ST, SLT, sport, etc. So from what I've gatthered it' not a normal truck soni assume the setup ain' normal either. That's y it' giving me hell trying to figure it all out