2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

2001 Dodge Ram 2500 Restoration

Thread Tools
 
Search this Thread
 
  #371  
Old 06-07-2020, 10:31 AM
MoparFanatic21's Avatar
MoparFanatic21
MoparFanatic21 is offline
Legend
Thread Starter
Join Date: Nov 2014
Posts: 8,032
Received 307 Likes on 299 Posts
Default

Originally Posted by HeyYou
T-case saver is cheap insurance. One less thing to worry about. So far as I am concerned, that is NOT a waste of money.
Figures I can't find my snap ring pliers now,, but I agree 100% with you
 
  #372  
Old 06-08-2020, 02:25 PM
MoparFanatic21's Avatar
MoparFanatic21
MoparFanatic21 is offline
Legend
Thread Starter
Join Date: Nov 2014
Posts: 8,032
Received 307 Likes on 299 Posts
Default Part Update

Ship/Reviewing Dates as follows;
BDS Transfer Case Indexing Ring: Unknown
Transfer Case Saver: Unknown
Engine Parts:. End of June
Tuner: Middle Of July

​​​​
 
  #373  
Old 06-08-2020, 02:48 PM
HeyYou's Avatar
HeyYou
HeyYou is online now
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 81,754
Likes: 0
Received 3,293 Likes on 3,040 Posts
Default

Holy smokes..... When they said "Shipping may be delayed." They weren't just a'whistlin' dixie.....
 
  #374  
Old 06-08-2020, 08:26 PM
MoparFanatic21's Avatar
MoparFanatic21
MoparFanatic21 is offline
Legend
Thread Starter
Join Date: Nov 2014
Posts: 8,032
Received 307 Likes on 299 Posts
Default

Originally Posted by HeyYou
Holy smokes..... When they said "Shipping may be delayed." They weren't just a'whistlin' dixie.....
They said 1-2 weeks for the parts (waiting on the rockers I went with 1.6 ratio)

Tune they said takes 4-6 weeks
Hey at least they are true to their word
 
  #375  
Old 06-10-2020, 12:14 PM
MoparFanatic21's Avatar
MoparFanatic21
MoparFanatic21 is offline
Legend
Thread Starter
Join Date: Nov 2014
Posts: 8,032
Received 307 Likes on 299 Posts
Default More Parts!

I got the Transfer Case Saver yesterday and installed it.
Today I received the transfer case indexing ring. Also ordered the speedo gear, SYE eliminator for the transfer case, and a high angle front driveshaft from Adams Driveshaft. I also ordered a Daystar Cradle to eliminate the air bag limiting my flex, and I moved the front shocks out of the coil springs and put them beside it. I am waiting for the coil over adjustable Bilstein shocks to come.

 

Last edited by MoparFanatic21; 06-10-2020 at 09:15 PM.
  #376  
Old 06-10-2020, 09:14 PM
MoparFanatic21's Avatar
MoparFanatic21
MoparFanatic21 is offline
Legend
Thread Starter
Join Date: Nov 2014
Posts: 8,032
Received 307 Likes on 299 Posts
Default Transfer Case Indexing Ring

The indexing ring is installed and the transfer case is installed. I regret lifting it was just out of arms length to get that heavy SOB on the transmission laying on my back. I now have 4.1 low ratio and the transfer case saver is installed . Now I just have to wait until I get the speedo gear and it will be complete
 
  #377  
Old 06-16-2020, 01:08 PM
MoparFanatic21's Avatar
MoparFanatic21
MoparFanatic21 is offline
Legend
Thread Starter
Join Date: Nov 2014
Posts: 8,032
Received 307 Likes on 299 Posts
Default Update# 6,543

Well the engine parts came in along with the speedo gear. Waiting on the crank to come back from the machine shop and the tune to come in so I can run the truck.

 
  #378  
Old 06-16-2020, 04:59 PM
MoparFanatic21's Avatar
MoparFanatic21
MoparFanatic21 is offline
Legend
Thread Starter
Join Date: Nov 2014
Posts: 8,032
Received 307 Likes on 299 Posts
Default Intake

The intake is together and I just say it looks badass!
 
  #379  
Old 06-16-2020, 07:12 PM
HeyYou's Avatar
HeyYou
HeyYou is online now
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 81,754
Likes: 0
Received 3,293 Likes on 3,040 Posts
Default

Originally Posted by MoparFanatic21
The intake is together and I just say it looks badass!
Gonna have to agree with ya there. That looks KILLER!
 
  #380  
Old 06-17-2020, 11:59 AM
Mike Holmen's Avatar
Mike Holmen
Mike Holmen is offline
Professional
Join Date: Nov 2019
Posts: 196
Received 14 Likes on 14 Posts
Default

Mopar, You running stock injectors?
 


Quick Reply: 2001 Dodge Ram 2500 Restoration



All times are GMT -4. The time now is 12:08 PM.