lights
#1
lights
im in the market for lights and i have some questions, i have a pair of hella 500s, can i swap those out for the upgraded 100w lights bulbs in them? or will i have a problem with melting because of the difference in output intensity?
http://www.discountfleetsupply.com/helh83135312.html
http://www.discountfleetsupply.com/helh83135312.html
#2
You could overheat the wires and cause a fire, melt some part of the housing, or you could be okay doing it. Especially leaving them on for a while. I have 55 watt bulbs in my PIAA's, and never even considered swapping them for a higher wattage bulb. I definitely wouldn't do it, it's not worth the risk..
#4
You could overheat the wires and cause a fire, melt some part of the housing, or you could be okay doing it. Especially leaving them on for a while. I have 55 watt bulbs in my PIAA's, and never even considered swapping them for a higher wattage bulb. I definitely wouldn't do it, it's not worth the risk..
this is a very good idea, slight problem, i have no idea on how to do that
#5
http://www.clubfrontier.org/forums/f...version-69647/
#6
Just need a drill bit, dremel, and maybe some epoxy.
http://www.clubfrontier.org/forums/f...version-69647/
http://www.clubfrontier.org/forums/f...version-69647/
#7
Trending Topics
#8
#9
#10
If your obsessed with HID driving lights, just get some HID driving lights. They aren't cheap, but here's a set of KC's for half price.
At least they'll be in a proper housing and distribute the light correctly.
KC HID's
At least they'll be in a proper housing and distribute the light correctly.
KC HID's