3rd Gen Dakota 2005 - 2011 Dodge Dakota Tech - The ultimate forum for technical help on the 3rd Gen Dakota.

Bed Repair

Thread Tools
 
Search this Thread
 
  #1  
Old 04-14-2012, 02:44 PM
EatTheHaggis's Avatar
EatTheHaggis
EatTheHaggis is offline
Registered User
Thread Starter
Join Date: Apr 2012
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Exclamation Bed Repair

Does anyone know if you can replace part of the bed on 07 Dakota SLT, 6 cyl ?? The passenside side has been hit for a second time. I was not too happy with the 1st repair, and now that its been hit again, I would rather just put a new side on it. Are the sides replaceable, or do you have to replace the entire bed? Also anyone know a good body parts source in Columbus, GA area or online? Used Dakota parts after 1999 do not exist in Columbus, GA. Aftermarket bed styles would also be an option if anyone knows any good places.
 
  #2  
Old 04-14-2012, 04:31 PM
Reject's Avatar
Reject
Reject is offline
Record Breaker
Join Date: Dec 2010
Location: Nova Scotia, CANADA
Posts: 1,191
Likes: 0
Received 1 Like on 1 Post
Default

I would think the sides are replaceable. Any 05+ Bed should fit, as long as its the same Body Type (Club Cab or Quad Cab) As they wont fit on each others frames.

I had my Pass. Side repaired 7 or so months after I bought my truck
 
  #3  
Old 04-14-2012, 04:50 PM
MitsuRaider's Avatar
MitsuRaider
MitsuRaider is offline
All Star
Join Date: Mar 2011
Location: Miami, Florida
Posts: 838
Likes: 0
Received 1 Like on 1 Post
Default

You have to buy the rear quarter panel which is about $1300. It has to we welded off and on.
 
  #4  
Old 04-14-2012, 05:12 PM
FrenicX's Avatar
FrenicX
FrenicX is offline
Record Breaker
Join Date: Jan 2011
Location: Sandy, UT. (SLC Suburbs)
Posts: 2,063
Likes: 0
Received 5 Likes on 5 Posts
Default

Check with your closest Certifit dealer, which looks like Atlanta (forest park) (404) 363-4222 to see if they carry the panel. The website won't show it. Their parts are usually pretty cheap.

I have a repair aswell on my drivers side that I'm not too happy with, the paint doesn't match very well.
 
  #5  
Old 04-15-2012, 08:08 PM
Alfons's Avatar
Alfons
Alfons is offline
Record Breaker
Join Date: Nov 2011
Location: Ontario, Canada
Posts: 1,013
Likes: 0
Received 2 Likes on 2 Posts
Default

Unless you can do all the work yourself, you would probably find it cheaper to get a whole bed from an auto salvage yard than to get the quarter panel and get it welded in, get the body work done and then painting.
 
  #6  
Old 04-15-2012, 08:58 PM
Eimer123's Avatar
Eimer123
Eimer123 is offline
Record Breaker
Join Date: Mar 2010
Location: Noblesville Indiana
Posts: 1,980
Likes: 0
Received 2 Likes on 2 Posts
Default

PANEL, Box Side Outer
55359238AA - crew - Right
55359239AA - crew - Left
55362816AA - club - Right
55362817AA - club - Left

2 PANEL, Box Side, Complete
05142334AA - crew - Right
05142335AA - crew - Left
05142582AA - club - Right
05142583AA - club - Left
 
  #7  
Old 04-16-2012, 09:48 AM
lghtngblt02's Avatar
lghtngblt02
lghtngblt02 is offline
The RAM Administrator
Dodge Forum Administrator
Join Date: Jan 2008
Location: Lemoyne, Pennsylvania
Posts: 9,649
Received 23 Likes on 11 Posts
Default

It can be done, when I was rear ended the tail gate and the whole driver's side panel of the box was replace as well as a few other components. It was pricey...
 
  #8  
Old 04-16-2012, 04:19 PM
Reject's Avatar
Reject
Reject is offline
Record Breaker
Join Date: Dec 2010
Location: Nova Scotia, CANADA
Posts: 1,191
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by lghtngblt02
It can be done, when I was rear ended the tail gate and the whole driver's side panel of the box was replace as well as a few other components. It was pricey...
Mine was $1300 to repair this:



Now they also priced repainting (or touching up) a scratch it the rear bumper from it, and removal of my toolbox and backrack, then also a new set of 4 mudflaps. I told them I would take off the toolbox, Backrack, Repaint the bumper and Didnt need the mudflaps. I made $450 I gave the person who hit me the quote for the $1300. Who promptly paid without even questioning it. Since I could have made her daughter lose her license, get a massive fine, Criminal record and Higher insurance since her hit and ran (I fallowed her right to her house, 10 minutes away. My brother actually seen it happen (and fallowed me), He was in the parking lot she pulled out of. He seen me do a U-turn (since she was turning the other direction) and then seen me kick up a cloud when I seen she wasnt pulling over.
 

Last edited by Reject; 04-16-2012 at 04:24 PM.
  #9  
Old 04-16-2012, 04:56 PM
FrenicX's Avatar
FrenicX
FrenicX is offline
Record Breaker
Join Date: Jan 2011
Location: Sandy, UT. (SLC Suburbs)
Posts: 2,063
Likes: 0
Received 5 Likes on 5 Posts
Default

I remember that story, around here, I'm pretty sure I never would have heard from the person again, so I call the popo for anything. You had the advantage of knowing where they live though lol.
 
  #10  
Old 04-16-2012, 06:11 PM
Reject's Avatar
Reject
Reject is offline
Record Breaker
Join Date: Dec 2010
Location: Nova Scotia, CANADA
Posts: 1,191
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by FrenicX
I remember that story, around here, I'm pretty sure I never would have heard from the person again, so I call the popo for anything. You had the advantage of knowing where they live though lol.
Yea, I figured id let her off since she was only 16, When I rear-ended a F150, They guy said we didnt have to go thru insurance ans such, so Mine wouldnt go up.
Cost me $3000 to fix both my parents 2000 Dakota, and his 2010 F150.
His cost $1200 for a new chrome bumper and such, $1600 to fix my parents, We had to replace the Hood, Grille, Grille bracket, Lwr and Upr Rad Supports, Rad, Headlights, Turn signals, and Both Fenders (Painted by Dodge to)
We did the work to
Went from this:



To This:


Makes you think, All that only cost $1600, A simple Dent and some tweaking then paint cost $1300 on my 05...

O how I miss it, But when you need to replace all 4 Ball-joints and a manifold at once, time to GTFO lol
 


Quick Reply: Bed Repair



All times are GMT -4. The time now is 09:39 AM.