3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

P0205 Code replaced injector no help

Thread Tools
 
Search this Thread
 
  #1  
Old 01-03-2020, 11:43 AM
Harley36's Avatar
Harley36
Harley36 is offline
Registered User
Thread Starter
Join Date: Jan 2020
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default P0205 Code replaced injector no help

I have a 2004 Dodge Ram 5.7. Driving home it started running very rough and died at stops. It would restart but only if I gave it gas. Check engien light finally came on with a P0205. Changed the number 5 injector, but no help. Checked compression in number 5 and had about 120. Checked the wires and tested with a light and it is getting a pulse at injector connector. Any ideas?
 
  #2  
Old 01-03-2020, 11:56 AM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 81,518
Likes: 0
Received 3,270 Likes on 3,017 Posts
Default

Take a look at the connector, sometimes they don't make good contact with the pins on the injector, and you get poor performance. Aside from that, it seems that everything is working as it should..... except.... it isn't. Check resistance on the injector. Maybe a bad part right out of the box?
 
  #3  
Old 01-03-2020, 02:23 PM
Harley36's Avatar
Harley36
Harley36 is offline
Registered User
Thread Starter
Join Date: Jan 2020
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by HeyYou
Take a look at the connector, sometimes they don't make good contact with the pins on the injector, and you get poor performance. Aside from that, it seems that everything is working as it should..... except.... it isn't. Check resistance on the injector. Maybe a bad part right out of the box?
Looked at connection and can not see a problem. Checked resistance and read 11.9 sometimes 12. Check another one on same side and got 12.1. Truck will start, but only if I pump the gas, and will keep running as long as I am giving it the gas. Once I let off the gas it will die.
 
  #4  
Old 01-03-2020, 02:47 PM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 81,518
Likes: 0
Received 3,270 Likes on 3,017 Posts
Default

Try swapping the injector with another one, see if the problem follows the injector.
 
  #5  
Old 01-03-2020, 03:49 PM
Harley36's Avatar
Harley36
Harley36 is offline
Registered User
Thread Starter
Join Date: Jan 2020
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default

Thought about doing that, but now I no longer get a check engine code. It still runs bad and hard to start but no codes of any kind.
 
  #6  
Old 01-03-2020, 06:35 PM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 81,518
Likes: 0
Received 3,270 Likes on 3,017 Posts
Default

How old, and what kind of spark plugs? Done anything to the truck lately? Is this something that kinda crept up slowly, and got progressively worse, or, did it just start running like crap one day.
 
  #7  
Old 01-05-2020, 12:09 PM
Harley36's Avatar
Harley36
Harley36 is offline
Registered User
Thread Starter
Join Date: Jan 2020
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default

Changed plugs about a year ago. Replaced EGR about a month ago. All was running fine until this happened.
 
  #8  
Old 01-05-2020, 04:09 PM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 81,518
Likes: 0
Received 3,270 Likes on 3,017 Posts
Default

Swap the injector with another one. See what happens.
 
  #9  
Old 01-10-2020, 01:09 PM
Harley36's Avatar
Harley36
Harley36 is offline
Registered User
Thread Starter
Join Date: Jan 2020
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default

Not sure the problem is with the injector. No longer getting a check engine code of any kind. Can only get it to start by pumping the gas and can only keep it running by giving it gas and holding it at 2000 or more RPMs.
 
  #10  
Old 01-10-2020, 01:58 PM
TrueDogman's Avatar
TrueDogman
TrueDogman is offline
Captain
Join Date: Mar 2012
Posts: 596
Received 33 Likes on 33 Posts
Default

Should have thrown a code but make sure your new egr isnt stuck open.
 


Quick Reply: P0205 Code replaced injector no help



All times are GMT -4. The time now is 03:45 AM.