Dyno #s
#1
#2
Still *very* impressive to a former 3x 04-08 style F150 guy. 22% drive train loss is not all that bad when you consider my 06 F150 FX4 with the 5.4L 4speed trans w/ 3.73 rear stock at 300hp to the flywheel was 214 rwhp ( 28.5% loss ). This was on a dynojet, 85 degree day but with a huge barrel fan blowing in front. A stage II package ( tuner/intake/catback magnaflow exhaust/efans and ud pulleys ) brought it up to 264 rwhp, same dyno around same temp but it was enough for me to walk any stock 3rd gen Ram around town.
#4
Im going to dyno mine next week at the FastHemis grand opening ($75 special 3 runs).. so i will be able to compare mine with an intake and exhaust to other rams to see if i gained/lost and hp/tq throughout the power band.. im guessing my 24s will throw off the results a little... maybe i can bolt on someones stocks for the run..
#5
Results from Hypertechs Dyno run is 340 RWHP for a stock 09 Hemi Ram:
http://www.hypertech-inc.com/media/d...%20cheroke.pdf
http://www.hypertech-inc.com/media/d...%20cheroke.pdf
#6
Results from Hypertechs Dyno run is 340 RWHP for a stock 09 Hemi Ram:
http://www.hypertech-inc.com/media/d...%20cheroke.pdf
http://www.hypertech-inc.com/media/d...%20cheroke.pdf
sae setting ? Yea, I 've never been too sure on that one, 12.8 % loss?? That's up there with the Titan's loss which has always been impressive ...
#7
Trending Topics
#8
walnut isnt to far from me.. im in Santa Monica
you should come to the mopar g2g (check out dodge trucks lol) in torrance friday night
https://dodgeforum.com/forum/west/21...-23-in-la.html
you should come to the mopar g2g (check out dodge trucks lol) in torrance friday night
https://dodgeforum.com/forum/west/21...-23-in-la.html
Last edited by Doc Fluty; 08-20-2009 at 08:06 PM.
#9
Here is a link to aFe,s Cold Air Intake System Stage 2 Dodge RAM 1500 2009 V8-5.7L Hemi http://afepower.com/catalog/51-11632/NPA.pdf
Its has the Dyno chart on it to.
Its has the Dyno chart on it to.
#10