What Did You Do To Your 2ND GEN RAM Today?
seems as though i may have a ground problem...
now that the truck is back together, anytime i hit the brakes, or turn signal, the back up light comes on.
this only happens when the trail harness is connected. when i by pass the trailer harness it doesnt do this. ive re-grounded the trailer harness, and it still hasnt fixed it.
any ideas?
anyone have a pic of the underside of their truck that has the tow package, so i can make sure im not connecting things wrong?
now that the truck is back together, anytime i hit the brakes, or turn signal, the back up light comes on.
this only happens when the trail harness is connected. when i by pass the trailer harness it doesnt do this. ive re-grounded the trailer harness, and it still hasnt fixed it.
any ideas?
anyone have a pic of the underside of their truck that has the tow package, so i can make sure im not connecting things wrong?
Took the leveling kit and 35's off my '95 the other day, returned it to stock to sell.
At the same time I put the spacers on the '01. Bought an injection pump from a CumminsForum user that day for $525 as well.
Yesterday I replaced the rod ends in my crossover drag link on my '93 and greased the entire front end. Tightened up the steering quite a bit. Still more clunks to address though.
At the same time I put the spacers on the '01. Bought an injection pump from a CumminsForum user that day for $525 as well.
Yesterday I replaced the rod ends in my crossover drag link on my '93 and greased the entire front end. Tightened up the steering quite a bit. Still more clunks to address though.
Took the leveling kit and 35's off my '95 the other day, returned it to stock to sell.
At the same time I put the spacers on the '01. Bought an injection pump from a CumminsForum user that day for $525 as well.
Yesterday I replaced the rod ends in my crossover drag link on my '93 and greased the entire front end. Tightened up the steering quite a bit. Still more clunks to address though.
At the same time I put the spacers on the '01. Bought an injection pump from a CumminsForum user that day for $525 as well.
Yesterday I replaced the rod ends in my crossover drag link on my '93 and greased the entire front end. Tightened up the steering quite a bit. Still more clunks to address though.
So I went into walmart today to pickup some more bath towels for my mom cause I used all her nice ones on my truck. After navigating to the towels while dodging people and listening to whining screaming babies. I got the towels and made my way back to the truck. As usually I go to start her up and here a "click" so I get out check under the hood and cant seem to find what's going on. So anyways after a minute I figured it must be the battery terminal. Went got some Coca Cola bored it all over the corroded terminals. Now she starts up like shes brand new. Parking lot was dead green from all the acid when I left.... Thats what I did to my ram today... The walmart Rep also told me to unplug anything from the accesories input plug when I leave cause thats what causes this to happen? hmmmm
Took the leveling kit and 35's off my '95 the other day, returned it to stock to sell.
At the same time I put the spacers on the '01. Bought an injection pump from a CumminsForum user that day for $525 as well.
Yesterday I replaced the rod ends in my crossover drag link on my '93 and greased the entire front end. Tightened up the steering quite a bit. Still more clunks to address though.
At the same time I put the spacers on the '01. Bought an injection pump from a CumminsForum user that day for $525 as well.
Yesterday I replaced the rod ends in my crossover drag link on my '93 and greased the entire front end. Tightened up the steering quite a bit. Still more clunks to address though.
Sold the old black rims today, sold the front Dana 44 Dl as well, 4.56 gears are spoken for. Picked up the new yoke and lug nutz yesterday. Today is a full day over in the barn/shop working on diffs.
Good luck selling the 95 hope it sells fast for you, I would have thought keeping it level would have made more people into it, but you know the market better than I do.
Sold the old black rims today, sold the front Dana 44 Dl as well, 4.56 gears are spoken for. Picked up the new yoke and lug nutz yesterday. Today is a full day over in the barn/shop working on diffs.
Sold the old black rims today, sold the front Dana 44 Dl as well, 4.56 gears are spoken for. Picked up the new yoke and lug nutz yesterday. Today is a full day over in the barn/shop working on diffs.
Gladyou are making progress on the diffs buddy