Some sick ace gauges, I was wanting to do that to my whole dash and add a pod. Today though I went and got new plugs, wires, filters, oil, and everything else for a proper tune-up. Now I have to replace the CA the base where the lines connect cracked.

 

me 2 right meoww as well, just in greenish blue not that blue

 

Was going to adjust my steering box today, but I don't have the right wrench and the nut is seized. Any suggestions?

 

Penetration Oil everywhere. The right wrench and a torch for possible need later.

 

Torch?
O.O
I got my dad looking for some Freeze off or Kroil at Lowes.
I do need a 16mm wrench though..

 

vice grips make the world go round

 

Torch is used to get the oil into the threads. Spray it down, let it soak a little then apply heat to surrounding nut and area. It will suck the oil in.

Not to be used to cut....

 

sold my plow, and removed old wiring to go with it. only to be replaced on thursday with a brand new 2012 fisher 8' HD straight blade!

untill thursday i have 5550.00 in my pocket... after thursday ill have around 0.00 in my pocket....

 

Finished my DIY grille inserts made of Black Gutter Guard, 4'' zip ties, and Silicone.





Inside:






I like ghetto... About $10 to make. Will do for now!

 

I "UNSUCCESSFULLY", tried to figure out why my dome light on my 02' Ram w/ 04' Hemi don't work..
So I tried to freon the a/c system..Oil and 4 quarts of freon , but the compressor won't kick in and the condenser fan wont turn on..I'm having a hard time figuring out the dash wires to the things that don't work..