When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
hey everyone i have 94 dodge ram1500 an im looking to make it handle like a indy car lol. i figure changing all bushings would be a good place to start but then in go blank.
hey everyone i have 94 dodge ram1500 an im looking to make it handle like a indy car lol. i figure changing all bushings would be a good place to start but then in go blank.
Any suggestion or ideas would be appreciated.
new or better sway bar will help u take corners better truck wont shift. making handleing better
change bushings to energy suspension bushings, upgrade sway bar, rear sway bar, stiffer tire with shorter sidewall, check all joints for play and replace as necessary
any ideas how much a performance sway bar would cost ? or a specific brand ? and rear sway bar lol i did not think of that, they those for are trucks ? or would i have to custom fab one ?
Look for drops with springs in the front and the drop springs will give a stiffer ride and the lower center of gravity will help a bit too. Another thing drop shocks have a stiffer valving to them and will make a lot of difference when going over bumps and through corners
2wd or 4wd, if it is 2wd I have a good one. my truck was lowered 2 front & 4 in the rear with a belltech kit that uses lowered coils in front, shackles & hangers in the rear. handling was excellent at high speed but needs a good set of shocks.