Superchips Questions and Updates
#1121
08-31-2009, 08:51 PM
Champion
Join Date: May 2007
Location: Northern Virginia
Posts: 2,687
Likes: 0
Received 0 Likes
on
0 Posts
No point in rushing things. We all remember what happened when another company rushed the trans options.
#1122
08-31-2009, 08:55 PM
I've been the guinea pig and we've had a few small bumps, but the testers won't feel those. They are working everything out real well. It should be an awesome final version for sure.
Sil
#1124
09-01-2009, 02:37 AM
Professional
Join Date: Feb 2009
Location: Little Rock, Arkansas
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
Ok folks, we're within fractions of having the WOT/PT TM nailed down. Today's latest pre-beta was the best to date. There are just two PT TM RPM ranges and one WOT TM shift that need to be adjusted. You'll be able to ZERO out TM across the board. We're getting closer to a well done product for the 07-08 years. The 04-05 years are going through bench testing.
I can't stress enough how exact they've been during this process. This is going to be a fine tuned release.
Waiting is the most difficult part. I know. I want to keep you all in the loop.
Sil
I can't stress enough how exact they've been during this process. This is going to be a fine tuned release.
Waiting is the most difficult part. I know. I want to keep you all in the loop.
Sil
#1126
09-01-2009, 04:56 PM
Rookie
Join Date: Sep 2008
Location: Telford, PA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
This is a bit off topic but it is the place for superchip questions. I called superchip today to ask about any problems i might have with my TTi long tube headers and y-pipes that i am installing. They said the long tubes will create a lean condition. Will i be okay? Should i not run the tune? Should I install a air-fuel gauge and keep an eye on it? I really want to be able to use the tuner with the headers.
#1128
09-01-2009, 08:28 PM
This is a bit off topic but it is the place for superchip questions. I called superchip today to ask about any problems i might have with my TTi long tube headers and y-pipes that i am installing. They said the long tubes will create a lean condition. Will i be okay? Should i not run the tune? Should I install a air-fuel gauge and keep an eye on it? I really want to be able to use the tuner with the headers.
#1129
09-01-2009, 09:23 PM
Rookie
Join Date: Sep 2008
Location: Telford, PA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
From what I have read (I don't have an A/F gauge so I don't know for sure) the SC 91 tune already leans out the mix a little. So adding some LT's will probably lean it out even more. How lean will it get, I don't know. You will have to install an A/F gauge to find out.
#1130
09-01-2009, 10:33 PM
Record Breaker
Join Date: Nov 2008
Location: Dayton, Ohio
Posts: 1,751
Likes: 0
Received 0 Likes
on
0 Posts
03 will not be supported. Only 04-08