get a set of 2" drop shackles but you will still be a little higher in the back. you can remove the overload springs for it to be closer to level. the difference is about 3/4".

 

whats up ninjas!? been a while! had to get with HIDextra so while i was in the neighborhood i figured id stop by. still have the ram, she's doing great. got a new addition to the fam... a bagged 89 blazer! chevy i know... but we needed a second family vehicle for the other new addition to the family. im having a daughter due in january! thankyou thankyou. hope alls well with everyone.... gonna put yee ol DF back on my favorites list and come back more often, brush the dust off the lower class section *here's a pic of the blazer*

 

I was looking to do a 2/4 drop on my ram, 04 RCSB. I already did the 2" shackle and clamped the front half of the leaf springs to get it level but I would like to have it dropped just a little more.

 

remove the overload leaf (the smallest of the pack) and that will give you another .75'' to an 1''

 

hey heard about people rearranging leafs to drop the rear end any one know what they are doing. Are they taking the middle springs and put them on top off the longest spring ensted of under or what?

 

do get the clamping of the springs any one have pics

 

I want to get a true 2/4 drop, where in Memphis can I get that done? Does anyone know anyplace that can do it? I guess the next time I see a lowered Ram I should chase them down and ask them where they got it done, lol.

 

Hey all, Im looking to do a 2/4 drop on my quad cab and iv pretty much decided on the mcgrughys 2/4 spindle kit. I was wondering what tires should i get for that set up sine obviously my 35s are not going to fit. my wheels are 17x9 with 5.39 bs and +10 offset. I was thinking of just going back to stock with a 265/70r17 that would put me at about a 31x10.5 or i could get the 245/70r17 but i really dont want a 9 inch wide tire. What do you suggest

 

the_ocho: be careful with the 2/4 drop. I put that drop on my quad cab and my stock 17" wheels would not fit over the spindle. I don't know how you would test it, but I just wanted to let you know. Good luck.

 

Here It is now. Probably going to go lower. this is with ebachi coils up front and belltech leafs out back