hooking up nitrous to my 1995 dakota.
#1
02-08-2017, 09:14 PM
Join Date: Feb 2017
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
#3
02-09-2017, 06:43 PM
Join Date: Feb 2017
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
#4
02-09-2017, 06:45 PM
Join Date: Feb 2017
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
#7
02-10-2017, 10:28 AM
Join Date: Feb 2017
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
02-10-2017, 11:57 AM
When I look up (rock auto) a 95 5.2 dakota, they show no pressure regulator, however when I look up the fuel pump assy for the same truck they show its included or part of the fuel pump assy in the tank.
BTW is that a wet or dry system you are installing? FWIW I prefer the wet system myself.
BTW is that a wet or dry system you are installing? FWIW I prefer the wet system myself.
#9
02-10-2017, 04:57 PM
Champion
MY copy of the 1995 FSM, on page 14-8, at the start of the last section (section named "FUEL SYSTEM PRESSURE TEST—3.9L/5.2L ENGINE") has:
The vacuum assisted fuel pressure regulator located at the rear of the fuel rail is no longer used on the 3.9L or 5.2L engine.
Fuel systems on the 3.9L/5.2L engines are equipped with a fuel tank module mounted, combination fuel filter/fuel pressure regulator (Fig. 8). The fuel pressure regulator is a mechanical device that is not controlled by the powertrain control module (PCM) or engine vacuum.
Fuel systems on the 3.9L/5.2L engines are equipped with a fuel tank module mounted, combination fuel filter/fuel pressure regulator (Fig. 8). The fuel pressure regulator is a mechanical device that is not controlled by the powertrain control module (PCM) or engine vacuum.
#10
02-10-2017, 06:40 PM
Join Date: Feb 2017
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
